[GE users] possible qstat problem with 6.0u7?

Stephan Grell - Sun Germany - SSG - Software Engineer stephan.grell at sun.com
Thu Dec 15 12:15:29 GMT 2005


Sebastian Stark wrote:

>On Thursday 15 December 2005 10:37, Stephan Grell - Sun Germany - SSG - 
>Software Engineer wrote:
>  
>
>>Sebastian Stark wrote:
>>    
>>
>>>I use this command in one of my scripts:
>>>
>>> qstat -F ml,sigtb,stattb,opttb,imagetb,compiler,simulink,cplex1,cplex2
>>>-q all.q at node101
>>>
>>>It stopped working right after I upgraded from 6.0u4 to 6.0u7. There's no
>>>output at all when I use qstat with the "-q" parameter. Can anybody
>>>confirm that?
>>>      
>>>
>>Hm, I just tested that and I get the requested output on a solaris machine.
>>
>>Can you give us some more hints on what is going wrong on your side?
>>    
>>
>
>If I run the above command without "-q ..." I get lots of these:
>  
>
That means that the execd is not running. Did you upgrade and restart 
them as well?

Stephan

>[...]
>----------------------------------------------------------------------------
>idle.q at node9                   BP    0/1       -NA-     -NA-          au
>        gc:simulink=1
>        gc:stattb=2
>        gc:sigtb=1
>        gc:matlab=56
>        gc:opttb=11
>        gc:imagetb=0
>        gc:compiler=1
>----------------------------------------------------------------------------
>parallel.q at node141             BIP   6/8       6.01     lx24-amd64
>        gc:simulink=1
>        gc:stattb=2
>        gc:sigtb=1
>        gc:matlab=56
>        gc:opttb=11
>        gc:imagetb=0
>        gc:compiler=1
> 916123 0.12673 je42245    je           r     12/15/2005 08:58:59     1
> 916124 0.12673 je85597    je           r     12/15/2005 08:59:00     1
> 916126 0.12673 je81593    je           r     12/15/2005 08:59:00     1
> 916143 0.12673 je37588    je           r     12/15/2005 08:59:40     1
> 916145 0.12673 je41985    je           r     12/15/2005 08:59:44     1
> 916146 0.12673 je75366    je           r     12/15/2005 08:59:45     1
>[...]
>
>If I append a queue instance selection to the command, like "-q idle.q at node9" 
>I get zero output.
>
>However, if I append a cluster queue selection, like "-q idle.q" it works like 
>expected:
>
>[...]
>----------------------------------------------------------------------------
>idle.q at node8                   BP    0/1       -NA-     lx24-x86      au
>        gc:simulink=1
>        gc:stattb=2
>        gc:sigtb=1
>        gc:matlab=56
>        gc:opttb=11
>        gc:imagetb=0
>        gc:compiler=1
>----------------------------------------------------------------------------
>idle.q at node9                   BP    0/1       -NA-     -NA-          au
>        gc:simulink=1
>        gc:stattb=2
>        gc:sigtb=1
>        gc:matlab=56
>        gc:opttb=11
>        gc:imagetb=0
>        gc:compiler=1
>[...]
>
>
>  
>


-- 
Sun Microsystems GmbH           Stephan Grell
Dr. Leo-Ritter-Str. 7           Software Engineer
93054 Regensburg                Phone: (+49 941)3075 226
Germany                         Fax:   (+49 941)3075 222
http://www.sun.com/grid         mailto:stephan.grell at sun.com



---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list