[GE users] SGE in dynamic IP

Nano Surbakti nano.surbakti at gmail.com
Mon Aug 7 04:48:04 BST 2006


    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some special characters may be displayed incorrectly. ]

Yup.. those grid hosts have to access internet.. :(
This admin is the strict one, can't negotiate with him (I've tried).
But I will try again to  negotiate with him and my thesis supervisor.

Thanks.

--
Nano Surbakti

On 8/7/06, tmac <tmacmd at gmail.com> wrote:
> Do the grid hosts have to access the internet?
> Make your own dhcp network NAT'd from a single IP.
> I think your admin should work with you at least a little to allow you to
> use DHCP and let him use the DHCP server to assign specific IP addresses to
> specific MAC addresses. It is not that difficult to impliment and you would
> not be stealing anything from the DHCP pool since you are using the same
> number of hosts either way...
>
> --tmac
>
>
> On 8/6/06, Nano Surbakti <nano.surbakti at gmail.com> wrote:
> >
>  On 8/6/06, Reuti <reuti at staff.uni-marburg.de> wrote:
> > Hi,
> >
> > Am 06.08.2006 um 08:23 schrieb Nano Surbakti:
> >
> > > Hi,
> > >
>  > > Is it possible to setup a cluster from computers which receive IP from
> > > DHCP? The DHCP server is setup so it gives the different IP everytime
> > > the computer reboot.
> > > The most I can do is to use a computer in the server room (which has
> > > static IP) and install the master there. Those computers (with dynamic
> > > IP) are sun solaris 9, on sun sparc 64 bit; and the one in server room
> > > (with static IP) is linux on x86.
> >
> > although you are getting the TCP/IP address by DHCP, the DHCP server
> > can also bet set up to deliver always the same address for a
> > specified MAC-address. This way you can get both: a static address
> > delivered by DHCP.
> >
> > HTH - Reuti
>
> I've consulted with the admin on that department, and he said that is
> not allowed, because it against their network policy... too bad.
> Is there any way to setup SGE with one static master host, and several
> dynamic execute hosts?
> Thanks for the reply.
>
> --
> Nano Surbakti
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail:
> users-unsubscribe at gridengine.sunsource.net
> For additional commands, e-mail:
> users-help at gridengine.sunsource.net
>
>
>
>
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list