[GE users] Compilation on 64bit Linux PPC

Ron Chen ron_chen_123 at yahoo.com
Mon Jan 30 18:32:22 GMT 2006


    [ The following text is in the "iso-8859-1" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some special characters may be displayed incorrectly. ]

Yup, this is the problem.

If you compile SGE on LinuxPPC as 64-bit, then you will need to
change aimk:

case "lx26-ppc":
   set BUILDARCH = LINUXPPC
   set COMPILE_ARCH = LINUXPPC_26
   set TARGET_BITS = TARGET_32BIT

Set "TARGET_BITS" to TARGET_64BIT

Or, you can add -m32 to force gcc to generate 32-bit binaries.

 -Ron


--- Brady Catherman <bradyc at uidaho.edu> wrote:
> file sge_qmaster
> sge_qmaster: ELF 64-bit MSB executable, cisco 7500, version 1
> (SYSV),  
> for GNU/Linux 2.4.19, dynamically linked (uses shared libs),
> for GNU/ 
> Linux 2.4.19, stripped
> 
> uname -a
> Linux io01.bw01.ibest.uidaho.edu 2.6.14-gentoo-r7 #7 SMP Fri
> Jan 20  
> 09:07:19 PST 2006 ppc64 PPC970FX, altivec supported RackMac3,1
> GNU/Linux
> 
> I can't compile using ./aimk -32 though because it claims that
> -32  
> isn't supported with lx26-ppc.
> 
> Any thoughts?
> 
> 
> 
> 
> On Jan 30, 2006, at 8:50 AM, Rayson Ho wrote:
> 
> > Did you compile SGE as 64-bit?? Can you find out whether SGE
> is
> > compiled as 32-bit or 64-bit:
> >
> > % file <path>/sge_qmaster
> >
> > I used to get it working on a 64-bit PPC Linux machine with
> 32-bit SGE
> > binaries...
> >
> > Rayson
> >
> >
> >
> > On 1/30/06, Brady Catherman <bradyc at uidaho.edu> wrote:
> >>
> >> Thats why I am asking about compilation. This is the same
> install on
> >> the same box. The scheduler can not talk to the qmaster
> when started
> >> using the install_qmaster script.
> >>
> >> Does anybody have SGE working on a full 64 bit version of
> PPC linux?
> >> If so, what where your exact compile options in order to
> get it
> >> installed? Was any tweaking necessary? And what version are
> you  
> >> running?
> >>
> >> I am about to try 6.0u6 again just to see if I can get it
> working..
> >>
> >>
> >> On Jan 30, 2006, at 12:20 AM, Stephan Grell - Sun Germany -
> SSG -
> >> Software Engineer wrote:
> >>
> >>> Hi,
> >>>
> >>> the messages mean,that you have mixed different SGE
> versions or
> >>> something
> >>> went wrong during the compilation. the "cull version"
> needs to be
> >>> the same
> >>> amoung all clients.
> >>>
> >>> It looks as if the master is a u7 and the scheduler
> something else.
> >>>
> >>> Cheers,
> >>> Stephan
> >>>
> >>> Brady Catherman wrote On 01/29/06 22:47,:
> >>>
> >>>> After compiling grid engine on a Linux PPC system with
> 64bit  
> >>>> kernel/
> >>>> libraries I can't seem to get anything to talk to the
> qmaster.. The
> >>>> only errors that are spit out are:
> >>>>
> >>>> 01/29/2006 13:47:21|qmaster|io01|E|wrong cull version,
> read
> >>>> 0x00000000, but expected actual version 0x10020000
> >>>> 01/29/2006 13:47:21|qmaster|io01|E|error unpacking gdi
> request:  
> >>>> wrong
> >>>> cull version
> >>>> 01/29/2006 13:48:25|qmaster|io01|E|wrong cull version,
> read
> >>>> 0x00000000, but expected actual version 0x10020000
> >>>> 01/29/2006 13:48:25|qmaster|io01|E|error unpacking gdi
> request:  
> >>>> wrong
> >>>> cull version
> >>>> 01/29/2006 13:49:29|qmaster|io01|E|wrong cull version,
> read
> >>>> 0x00000000, but expected actual version 0x10020000
> >>>> 01/29/2006 13:49:29|qmaster|io01|E|error unpacking gdi
> request:  
> >>>> wrong
> >>>> cull version
> >>>> 01/29/2006 13:50:33|qmaster|io01|E|wrong cull version,
> read
> >>>> 0x00000000, but expected actual version 0x10020000
> >>>> 01/29/2006 13:50:33|qmaster|io01|E|error unpacking gdi
> request:  
> >>>> wrong
> >>>> cull version
> >>>> 01/29/2006 13:51:39|qmaster|io01|E|wrong cull version,
> read
> >>>> 0x00000000, but expected actual version 0x10020000
> >>>> 01/29/2006 13:51:39|qmaster|io01|E|error unpacking gdi
> request:  
> >>>> wrong
> >>>> cull version
> >>>>
> >>>> Anybody got any clue what could be causing this?
> >>>>
> >>>>
>
-------------------------------------------------------------------
> 
> >>>> --
> >>>> To unsubscribe, e-mail:
> users-unsubscribe at gridengine.sunsource.net
> >>>> For additional commands, e-mail: users- 
> >>>> help at gridengine.sunsource.net
> >>>>
> >>>>
> >>>>
> >>>
> >>>
>
--------------------------------------------------------------------
> 
> >>> -
> >>> To unsubscribe, e-mail:
> users-unsubscribe at gridengine.sunsource.net
> >>> For additional commands, e-mail:
> users-help at gridengine.sunsource.net
> >>>
> >>
> >>
>
---------------------------------------------------------------------
> >> To unsubscribe, e-mail:
> users-unsubscribe at gridengine.sunsource.net
> >> For additional commands, e-mail:
> users-help at gridengine.sunsource.net
> >>
> >>
> >
> >
>
---------------------------------------------------------------------
> > To unsubscribe, e-mail:
> users-unsubscribe at gridengine.sunsource.net
> > For additional commands, e-mail:
> users-help at gridengine.sunsource.net
> >
> 
>
---------------------------------------------------------------------
> To unsubscribe, e-mail:
> users-unsubscribe at gridengine.sunsource.net
> For additional commands, e-mail:
> users-help at gridengine.sunsource.net
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list