[GE users] qmaster logging error every 10 seconds

Reuti reuti at staff.uni-marburg.de
Fri Jun 30 20:47:41 BST 2006


Am 30.06.2006 um 21:43 schrieb Greg A:

> I ended up adding the user remote as a manager and then after about  
> a minute I went ahead and deleted it.  This seemed to clear up the  
> issue although it would be nice to see how this could be "viewed"  
> in the future.  From that regard if anyone knows a way to catch  
> these types of user requests it would be grand.

So the user "remote" was a real user on your system. Did you checked  
in the messages file, what action was then executed by him? - Reuti


>
> On 6/30/06, Greg A <clusterman at gmail.com> wrote:
> Using the dump option?
>
> qping -dump masterhost qmaster 1
>
> This doesn't show any "remote" user.  I've tried the -f option also  
> w/out luck.
>
>
>
> On 6/30/06, Stephan Grell <Stephan.Grell at sun.com> wrote: Hi Greg,
>
> someone is trying to issue a command as "remote" user without  
> having the
> right permission for it.
> This is most likely a qdel on an other users job, a qconf, or a qmod
> command.
> With the qping command you can see what is going in and out of the
> qmaster, including the information
> from where the request was send and which command was send. Qping  
> should
> be able to help you
> with figuring out what is going on.
>
> Stephan
>
> Greg A wrote On 06/30/06 00:03,:
>
> > We are receiving the following error every 10 seconds in the  
> messages
> > file on the qmaster.  I've tryed a snoop and truss to try and  
> capture
> > what/who is causing the message but I'm coming up empty.  I also  
> tried
> > changing the loglevel to equal log_info but that didn't shed anymore
> > light.
> >
> > 06/29/2006 17:53:32|qmaster|masterhost|E|denied: "remote" must be
> > manager for this operation
> > 06/29/2006 17:53:42|qmaster|masterhost|E|denied: "remote" must be
> > manager for this operation
> > 06/29/2006 17:53:52|qmaster|masterhost|E|denied: "remote" must be
> > manager for this operation
> >
> > The scheduler runs every 10 seconds but a truss of the scheduler
> > doesn't have any information.  There are no jobs in error state and
> > nobody with a user account of remote trying to qsub jobs.
> >
> > Does anyone have any ideas on how I can find the node/job/process
> > causing this error?
> >
> > Thanks in advance!
> >
> >
> >
>
> --
> Sun Microsystems GmbH           Stephan Grell
> Dr. Leo-Ritter-Str. 7           Software Engineer
> 93054 Regensburg                Phone: (+49 941)3075 226
> Germany                         Fax:   (+49 941)3075 222
> http://www.sun.com/grid          mailto:stephan.grell at sun.com
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
> For additional commands, e-mail: users-help at gridengine.sunsource.net
>
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list