[GE users] compile problem on NetBSD with SGE6u7

Ron Chen ron_chen_123 at yahoo.com
Thu Mar 16 15:01:43 GMT 2006


    [ The following text is in the "iso-8859-1" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some special characters may be displayed incorrectly. ]

I'm traveling these days, but will be back to the office this
weekend.

Any new problems on NetBSD?

 -Ron



--- Bill Knebel <billk at metrumrg.com> wrote:
> Ron,
> 
> If the offer is still open, could you forward the binaries you
> created 
> that you mention in the email below?
> 
> Thank you,
> 
> Bill
> 
> Ron Chen wrote:
> 
> >Hi,
> >
> >Want to try the binaries I compiled on the opensource compile
> >farm? Let me know and I will attach the execd and qmaster
> >binaries to you in a private mail.
> >
> > -Ron
> >
> >
> >--- Bill Knebel <billk at metrumrg.com> wrote:
> >  
> >
> >>Thought I would add some additional info.  I was able to
> >>install and run 
> >>SGE 5p3 from a precompiled binary for NetBSD3. I also ran
> >>qping and 
> >>searched for the sge daemons after getting the "daemonize"
> >>error.  The 
> >>output for "qping -info headnode.run 1025 qmasr ter 1" was:
> >>
> >>02/11/2006 13:17:12:
> >>SIRM version:             0.1
> >>SIRM message id:          1
> >>start time:               02/11/2006 13:12:10 (1139681530)
> >>run time [s]:             302
> >>messages in read buffer:  0
> >>messages in write buffer: 0
> >>nr. of connected clients: 1
> >>status:                   0
> >>info:                     TET: R (2.31) | EDT: R (0.31) |
> >>SIGT: R 
> >>(301.76) | MT(1): R (6.85) | MT(2): R (6.85) | OK
> >>Monitor:                  disabled
> >>
> >>and the output from ps -ax|grep sge was:
> >>
> >>13487 ?     Ia   0:00.08
> >>/usr/pkg/sge6u7/bin/nbsd-i386/sge_qmaster
> >>
> >>Not sure if this helps but there it is.
> >>
> >>Bill
> >>
> >>Ron Chen wrote:
> >>
> >>    
> >>
> >>>Not sure whether it is good news or bad news :p
> >>>
> >>>I just borrowed an opensource compile farm account and
> tested
> >>>SGE6u7_1 on NetBSD 3.0 on i386 (32-bit), it works for me.
> >>>
> >>>I compiled with "aimk -no-java -no-jni -no-secure
> >>>      
> >>>
> >>-spool-classic
> >>    
> >>
> >>>-no-qmon". Of course the account is non-root (that even
> that,
> >>>SGE still daemonizes) , so I used ports over 1024.
> >>>
> >>>Can you try with ports over 1024?
> >>>
> >>>BTW, what hardware are you running on?
> >>>
> >>>-Ron
> >>>
> >>>
> >>>--- Bill Knebel <billk at metrumrg.com> wrote:
> >>> 
> >>>
> >>>      
> >>>
> >>>>Well, let me know what you find out.
> >>>>
> >>>>Bill
> >>>>
> >>>>Ron Chen wrote:
> >>>>
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>>>>We've never tested SGE6 on NetBSD 3.0, and I will do it
> >>>>>          
> >>>>>
> >>this
> >>    
> >>
> >>>>>weekend.
> >>>>>
> >>>>>In fact, Dan McMahill and I talked about adding SGE6 to
> the
> >>>>>NetBSD 3 distribution in Jan 06, but I was too busy at
> that
> >>>>>time.
> >>>>>
> >>>>>-Ron
> >>>>>
> >>>>>
> >>>>>
> >>>>>--- Bill Knebel <billk at metrumrg.com> wrote:
> >>>>>
> >>>>>
> >>>>>     
> >>>>>
> >>>>>          
> >>>>>
> >>>>>>Ron,
> >>>>>>
> >>>>>>Thanks. That fixed it.  However, now I am having
> problems
> >>>>>>getting 
> >>>>>>qmaster installed. When it gets to the point of starting
> >>>>>>            
> >>>>>>
> >>the
> >>    
> >>
> >>>>>>daemons, it 
> >>>>>>exits with the following message:
> >>>>>>daemonize error: child exited before sending daemonize
> >>>>>>            
> >>>>>>
> >>state
> >>    
> >>
> >>>>>>a "cat" of /tmp/sge_messages yields
> >>>>>>02/09/2006 19:10:19|qmaster|headnode|E|communication
> error
> >>>>>>       
> >>>>>>
> >>>>>>            
> >>>>>>
> >>>>for
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>>>>>"headnode.run/qmaster/1" running on port 536: "can't
> bind
> >>>>>>socket"
> >>>>>>02/09/2006 19:10:20|qmaster|headnode|E|commlib error:
> >>>>>>            
> >>>>>>
> >>can't
> >>    
> >>
> >>>>>>bind socket 
> >>>>>>(no additional information available)
> >>>>>>02/09/2006 19:10:49|qmaster|headnode|C|abort qmaster
> >>>>>>            
> >>>>>>
> >>startup
> >>    
> >>
> >>>>>>due to 
> >>>>>>communication errors
> >>>>>>
> >>>>>>and of /tmp/schedd_messages yields
> >>>>>>02/09/2006 19:10:21|schedd|headnode|W|daemonize error:
> >>>>>>            
> >>>>>>
> >>child
> >>    
> >>
> >>>>>>exited 
> >>>>>>before sending daemonize state
> >>>>>>
> >>>>>>Any suggestions anyone?  I saw this on the user mailing
> >>>>>>archive but no 
> >>>>>>responses I saw were helpful.  The two ports in
> >>>>>>       
> >>>>>>
> >>>>>>            
> >>>>>>
> >>>>/etc/services
> >>>>   
> >>>>
> >>>>        
> >>>>
> >>>>>>are not 
> >>>>>>being used by anything else and this occurs if I try
> this
> >>>>>>            
> >>>>>>
> >>as
> 
=== message truncated ===


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list