[GE users]

Martin Mechelke martin.mechelke at gmail.com
Tue Mar 28 16:45:38 BST 2006


    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some special characters may be displayed incorrectly. ]

Thank you very much, there was a typo int the $SGE_ROOT I defined thaks 
a lot  and sorry for asking


Daniel Templeton wrote:

>Martin,
>
>First, please check that the qmaster is running:
>
> on Solaris
>% ps -ef | grep sge_qmaster
> or on Linux
>% ps -aux | grep sge_qmaster
>
>Next, make sure that you're sourced the settings file:
>
> on tcsh or csh
>% source $SGE_ROOT/$SGE_CELL/common/settings.csh
> or on bash, sh or ksh
>% . $SGE_ROOT/$SGE_CELL/common/settings.sh
>
>Now, from the same terminal as where you sourced the settings file, see
>if qstat can see the qmaster:
>
>% qstat -f
>
>If it doesn't complain that the qmaster is unreachable, the qmaster is
>up and running.  Try the execd install again (after sourcing the
>settings file if you're not using the same terminal).
>
>Daniel
>
>Martin Mechelke wrote On 03/29/06 15:44,:
>
>  
>
>>Hi there,
>>I am trying to install sge-6.0u7 for the first time. I have installed 
>>the master host and tryed to use the automated installation method, it 
>>installed the master host correctly but failed to install on the 
>>execution hosts. So I tried it manually but it stops reporting that no 
>>master hosts is installed.
>>I tried anything ... made sure sge is included in /etc/services ... 
>>passwordless ssh is possible
>>
>>Please help
>>
>>Martin Mechlke
>>
>>
>>here is my config file
>>
>>#-------------------------------------------------
>># SGE default configuration file
>>#-------------------------------------------------
>>
>># Use always fully qualified pathnames, please
>>
>># SGE_ROOT Path, this is basic information
>>#(mandatory for qmaster and execd installation)
>>SGE_ROOT="/opt/sge-6.0u7"
>>
>># SGE_QMASTER_PORT is used by qmaster for communication
>># Please enter the port in this way: 1300
>># Please do not this: 1300/tcp
>>#(mandatory for qmaster installation)
>>SGE_QMASTER_PORT="536"
>>
>># SGE_EXECD_PORT is used by execd for communication
>># Please enter the port in this way: 1300
>># Please do not this: 1300/tcp
>>#(mandatory for qmaster installation)
>>SGE_EXECD_PORT="537"
>>
>># CELL_NAME, will be a dir in SGE_ROOT, contains the common dir
>># Please enter only the name of the cell. No path, please
>>#(mandatory for qmaster and execd installation)
>>CELL_NAME="default"
>>
>># ADMIN_USER, if you want to use a different admin user than the owner,
>># of SGE_ROOT, you have to enter the user name, here
>># Leaving this blank, the owner of the SGE_ROOT dir will be used as
>>#admin user
>>ADMIN_USER=""
>>
>># The dir, where qmaster spools this parts, which are not spooled by DB
>>#(mandatory for qmaster installation)
>>QMASTER_SPOOL_DIR="/opt/sge-6.0u7/default/spool/qmaster"
>>
>># The dir, where the execd spools (active jobs)
>># This entry is needed, even if your are going to use
>># berkeley db spooling. Only cluster configuration and jobs will
>># be spooled in the database. The execution daemon still needs a spool
>># directory 
>>#(mandatory for qmaster installation)
>>EXECD_SPOOL_DIR="/opt/sge-6.0u7/default/spool"
>>
>># For monitoring and accounting of jobs, every job will get
>># unique GID. So you have to enter a free GID Range, which
>># is assigned to each job running on a machine.
>># If you want to run 100 Jobs at the same time on one host you
>># have to enter a GID-Range like that: 16000-16100
>>#(mandatory for qmaster installation)
>>GID_RANGE="20000-20100"
>>
>># If SGE is compiled with -spool-dynamic, you have to enter here, which
>># spooling method should be used. (classic or berkeleydb)
>>#(mandatory for qmaster installation)
>>SPOOLING_METHOD="berkeleydb"
>>
>># Name of the Server, where the Spooling DB is running on
>># if spooling methode is berkeleydb, it must be "none", when
>># using no spooling server and it must containe the servername
>># if a server should be used. In case of "classic" spooling,
>># can be left out
>>DB_SPOOLING_SERVER="none"
>>
>># The dir, where the DB spools
>># If berkeley db spooling is used, it must contain the path to
>># the spooling db. Please enter the full path. (eg. /tmp/data/spooldb)
>># Remember, this directory must be local on the qmaster host or on the
>># Berkeley DB Server host. No NSF mount, please
>>DB_SPOOLING_DIR="/opt/sge-6.0u7/default/spooldb"
>>
>># A List of Host which should become admin hosts
>># If you do not enter any host here, you have to add all of your hosts
>># by hand, after the installation. The autoinstallation works without
>># any entry
>>ADMIN_HOST_LIST="raold1.informatik.uni-tuebingen.de 
>>raold2.informatik.uni-tuebingen.de "
>>
>># A List of Host which should become submit hosts
>># If you do not enter any host here, you have to add all of your hosts
>># by hand, after the installation. The autoinstallation works without
>># any entry
>>SUBMIT_HOST_LIST="raold1.informatik.uni-tuebingen.de 
>>raold2.informatik.uni-tuebingen.de"
>>
>># A List of Host which should become exec hosts
>># If you do not enter any host here, you have to add all of your hosts
>># by hand, after the installation. The autoinstallation works without
>># any entry
>># (mandatory for execution host installation)
>>EXEC_HOST_LIST="raold1.informatik.uni-tuebingen.de"
>>
>># The dir, where the execd spools (local configuration)
>># If you want configure your execution daemons to spool in
>># a local directory, you have to enter this directory here.
>># If you do not want to configure a local execution host spool directory
>># please leave this empty
>>EXECD_SPOOL_DIR_LOCAL="/var/tmp/spool"
>>
>># If true, the domainnames will be ignored, during the hostname resolving
>># if false, the fully qualified domain name will be used for name resolving
>>HOSTNAME_RESOLVING="true"
>>
>># Shell, which should be used for remote installation (rsh/ssh)
>># This is only supported, if your hosts and rshd/sshd is configured,
>># not to ask for a password, or promting any message.
>>SHELL_NAME="ssh"
>>
>># Enter your default domain, if you are using /etc/hosts or NIS 
>>configuration
>>DEFAULT_DOMAIN="informatik.uni-tuebingen.de"
>>
>># If a job stops, fails, finnish, you can send a mail to this adress
>>ADMIN_MAIL="Martin.Mechelke at gmail.com"
>>
>># If true, the rc scripts (sgemaster, sgeexecd, sgebdb) will be added,
>># to start automatically during boottime
>>ADD_TO_RC="true"
>>
>>#If this is "true" the file permissions of executables will be set to 755
>>#and of ordenary file to 644. 
>>SET_FILE_PERMS="true"
>>
>># This option is not implemented, yet.
>># When a exechost should be uninstalled, the running jobs will be 
>>rescheduled
>>RESCHEDULE_JOBS="wait"
>>
>># Enter a one of the three distributed scheduler tuning configuration sets
>># (1=normal, 2=high, 3=max)
>>SCHEDD_CONF="1"
>>
>># The name of the shadow host. This host must have read/write permission
>># to the qmaster spool directory
>># If you want to setup a shadow host, you must enter the servername
>># (mandatory for shadowhost installation)
>>SHADOW_HOST=""
>>
>># Remove this execution hosts in automatic mode
>># (mandatory for unistallation of executions hosts)
>>EXEC_HOST_LIST_RM="raold1.inforamtik.uni-tuebingen.de"
>>
>># This is a Windows specific part of the auto isntallation template
>># If you going to install windows executions hosts, you have to enable the
>># windows support. To do this, please set the WINDOWS_SUPPORT variable
>># to "true". ("false" is disabled)
>># (mandatory for qmaster installation, by default WINDOWS_SUPPORT is
>># disabled)
>>WINDOWS_SUPPORT="false"
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
>>For additional commands, e-mail: users-help at gridengine.sunsource.net
>>
>> 
>>
>>    
>>
>
>  
>

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list