[GE users] Reg: windows domain users access to grid

manju a manju.kudu at gmail.com
Fri Nov 2 13:07:43 GMT 2007


    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some special characters may be displayed incorrectly. ]

Hi Harald,

yes i think in the past we got that hot fixes from that website
itself, please find the hotfix detials what i applied

1) SFU35-KB939778-X86-ENU
2) 934322-2003
3) 932143

Earlier my patch level was Interix 3.5 SP-8.0.1969.40 after applying
this it became Interix 3.5 SP-8.0.1969.58

thanks
Manjunath A.





On Nov 2, 2007 4:48 PM, Harald Pollinger <Harald.Pollinger at sun.com> wrote:
> Hi Manju,
>
> thank you very much for this information!
>
> So you just applied the hotfixes like described on
> http://www.duh.org/interix/hotfixes.php?
>
> Btw:
> On my Windows 2003 Server host I have patch level:
> Interix 3.5 SP-8.0.1969.54
>
> on my Windows XP SP 2 host it is:
> Interix 3.5 SP-8.0.1969.51
>
> AFAIK these are the highest available levels, but it's easy to miss some
> hotfixes on the confusing Microsoft hotfix pages.
>
>
> Regards,
> Harald
>
>
> manju a wrote:
> > Hi Harald,
> >
> > finally problem has got fixed, thanks for ur replays ... finally i
> > came to know whatever i applied hotfix not getting update on the
> > interix so this unique problem was coming... i reapplied this patches
> > it works fine... i like to tell another thing if the interix subsytem
> > patch level
> >
> > if u do uname -a on interix shell
> >
> > Interix execd_hostname  3.5 SP-8.0.1969.40(below) x86
> > Intel_x86_Family15_Model2_Stepping5 ( it will not work properly, )
> >
> >  patch level on the interix should be  3.5 SP-8.0.1969.50(above) x86
> > Intel_x86_Family15_Model2_Stepping5 (it will work fine as a execution
> > host) if the qmaster is 6.1u2 ...
> >
> >
> > thanks
> > Manjunath A.
> >
> >
> >
> >
> >
> >
> >
> > On Nov 1, 2007 9:52 PM, manju a <manju.kudu at gmail.com> wrote:
> >> Hi Harald,
> >>
> >> Do u have any more inputs on this!!! please suggest me...
> >>
> >> thanks
> >> Manju
> >>
> >>
> >> On Nov 1, 2007 6:36 PM, manju a <manju.kudu at gmail.com> wrote:
> >>> Hi Harald,
> >>>
> >>> yes i got the still  same messages "load sensor died through
> >>>  signal = 11"
> >>>
> >>> thanks
> >>> manjunath A.
> >>>
> >>>
> >>>
> >>>
> >>> On Nov 1, 2007 4:07 PM, Harald Pollinger <Harald.Pollinger at sun.com> wrote:
> >>>> Hi Manju,
> >>>>
> >>>> with the static_load.sh, do you still get the "load sensor died through
> >>>> signal = 11" messages in the execd messages file?
> >>>>
> >>>>
> >>>> Regards,
> >>>> Harald
> >>>>
> >>>> manju a wrote:
> >>>>> Hi Harald,
> >>>>>
> >>>>> I changed the load sensors to static_load using this command qconf
> >>>>> -mconf win_host_name n i restarted the execution host.. still not able
> >>>>> to get that sge_execd process under process list!!!! and another thing
> >>>>> i observed is qloadersensor.exe is running on the working
> >>>>> machine(where the sge_execd is running)... but i couldn't find it in
> >>>>> the not working machine... i reinstalled the SFU n applied the patch,
> >>>>> yes off course  i disabled the DEP.... no luck yet.... this type of
> >>>>> problem i m facing in nearly 5 to 6 machines... which is having two
> >>>>> drives n user profile pointing in to D drive n checked the OS patch
> >>>>> level it looks same in all the machines.........
> >>>>>
> >>>>> thanks
> >>>>> Manjunath
> >>>>>
> >>>>> On Oct 31, 2007 10:40 PM, Harald Pollinger <Harald.Pollinger at sun.com> wrote:
> >>>>>> Manju,
> >>>>>>
> >>>>>> signal 11 means "segmentation fault", i.e. the load sensor tries to
> >>>>>> access some not allocated memory. As the load sensors works on all other
> >>>>>> systems, I still assume that something is wrong with your Windows version...
> >>>>>>
> >>>>>> As a workaround, you could configure a different load sensor, at first
> >>>>>> only a dummy load sensor. "qconf -sconf <windows_host_name>" shows you
> >>>>>> what load sensor is currently configured, it should be
> >>>>>> "$SGE_ROOT/util/resources/loadsensors/interix-loadsensor.sh".
> >>>>>>
> >>>>>> Just configure a different load sensor script, e.g. one that only
> >>>>>> returns static data like the static_load.sh I've attached to this E-Mail.
> >>>>>>
> >>>>>> If the execd works with this load sensor, we should dig deeper into the
> >>>>>> load sensors problem.
> >>>>>>
> >>>>>> Regards,
> >>>>>> Harald
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> manju a wrote:
> >>>>>>> Hi Harald,
> >>>>>>>
> >>>>>>> please find the logs from the execution host (this logs from windows
> >>>>>>> execution host)
> >>>>>>>
> >>>>>>> 10/31/2007 06:23:29|execd|execd_host|I|starting up SGE 6.1u2 (win32-x86)
> >>>>>>> 10/31/2007 06:23:31|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:23:33|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:23:35|execd|execd_host|I|controlled shutdown 6.1u2
> >>>>>>> 10/31/2007 06:24:04|execd|execd_host|I|starting up SGE 6.1u2 (win32-x86)
> >>>>>>> 10/31/2007 06:24:05|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:24:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:24:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:25:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:26:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:26:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:27:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:28:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:28:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:29:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:30:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:30:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:31:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:32:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:32:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:33:27|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:34:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:34:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:35:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:36:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:36:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:37:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:38:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:38:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:39:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:40:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:40:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:41:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:42:06|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:42:46|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:43:26|execd|execd_host|E|load sensor died through signal = 11
> >>>>>>> 10/31/2007 06:43:29|execd|execd_host|I|controlled shutdown 6.1u2
> >>>>>>>
> >>>>>>> if i tried to start from $SGE_ROOT/bin/win32-x86/sge_execd after i m
> >>>>>>> in to dl 5 mode.... it will keep on struck at starting sge_execd , at
> >>>>>>> that time i can see the sge_execd process under process list !!!! but
> >>>>>>> it will not start.....
> >>>>>>>
> >>>>>>> please let me know if you got any thing atleast with this logs....
> >>>>>>>
> >>>>>>> thanks
> >>>>>>> Manjunath A.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> On Oct 31, 2007 7:00 PM, manju a <manju.kudu at gmail.com> wrote:
> >>>>>>>> yes i done that one also!!!! but no luck..... if i start
> >>>>>>>> /etc/init.d/sgeexecd start process it will come n disappear within a
> >>>>>>>> sec from the process list....
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On Oct 31, 2007 6:52 PM, Harald Pollinger <Harald.Pollinger at sun.com> wrote:
> >>>>>>>>> manju a wrote:
> >>>>>>>>>> Hi Harald,
> >>>>>>>>>>
> >>>>>>>>>> i already applied this hot fixes but not as suggested in the page(i
> >>>>>>>>>> mean order while applying the hot fixes) does it makes any difference
> >>>>>>>>>> ???
> >>>>>>>>> The page says: Yes, it makes a difference, apply them only in the
> >>>>>>>>> suggested order to make sure all of them work.
> >>>>>>>>>
> >>>>>>>>> Regards,
> >>>>>>>>> Harald
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>> thanks
> >>>>>>>>>> Manju
> >>>>>>>>>>
> >>>>>>>>>> On Oct 31, 2007 4:56 PM, Harald Pollinger <Harald.Pollinger at sun.com> wrote:
> >>>>>>>>>>> manju a wrote:
> >>>>>>>>>>>> Hi Harald,
> >>>>>>>>>>>>
> >>>>>>>>>>>>  i can see the below messages from master at  this location
> >>>>>>>>>>>> $SGE_ROOT/farm/spool/qmaster/messages
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> 10/30/2007 23:00:07|qmaster|testqmaster|E|commlib error: got read
> >>>>>>>>>>>> error (closing "execd_host.abc.com/qstat/85")
> >>>>>>>>>>>> 10/30/2007 23:28:44|qmaster|testqmaster|E|commlib error: got read
> >>>>>>>>>>>> error (closing "execd_host.abc.com/qconf/121")
> >>>>>>>>>>>> 10/30/2007 23:32:03|qmaster|testqmaster|E|commlib error: got read
> >>>>>>>>>>>> error (closing "execd_host.abc.com/qconf/125")
> >>>>>>>>>>>> 10/30/2007 23:32:44|qmaster|testqmaster|E|commlib error: got read
> >>>>>>>>>>>> error (closing "execd_host.abc.com/execd/1")
> >>>>>>>>>>>> 10/30/2007 23:33:28|qmaster|testqmaster|E|commlib error: got read
> >>>>>>>>>>>> error (closing "execd_host.abc.com/execd/1")
> >>>>>>>>>>>>
> >>>>>>>>>>>> what this commlib error means ???
> >>>>>>>>>>> It means that the qmaster is just before reading or already is reading
> >>>>>>>>>>> some data from the execd, but then the execd suddenly 'vanishes'.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>> testqmaster ----> qmaster server name
> >>>>>>>>>>>>
> >>>>>>>>>>>> execd_host-----> execution host name (sge_execd process not running
> >>>>>>>>>>>> machine name )
> >>>>>>>>>>>>
> >>>>>>>>>>>> pleas let me know if you got any thing from this logs....i m still
> >>>>>>>>>>>> trying to make run this sge_execd process but no luck.. please help me
> >>>>>>>>>>>> out this.......
> >>>>>>>>>>> I guess there is simply something wrong with your Windows/SFU host. You
> >>>>>>>>>>> could try to apply all Hotfixes suggested on this page:
> >>>>>>>>>>> http://www.duh.org/interix/hotfixes.php
> >>>>>>>>>>>
> >>>>>>>>>>> This is just a collection of all official Microsoft Hotfixes for SFU.
> >>>>>>>>>>> It's very difficult to find the Hotfixes and their dependencies on the
> >>>>>>>>>>> Microsoft pages, so just apply them in the order suggested here for your
> >>>>>>>>>>> Windows version.
> >>>>>>>>>>>
> >>>>>>>>>>> Regards,
> >>>>>>>>>>> Harald
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>> thanks
> >>>>>>>>>>>> Manjunath A,
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> On Oct 30, 2007 4:45 PM, Harald Pollinger <Harald.Pollinger at sun.com> wrote:
> >>>>>>>>>>>>> manju a wrote:
> >>>>>>>>>>>>>> Hi Harald,
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> i like to give some more information
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> whatever working machines all the windows profiles pointing in to
> >>>>>>>>>>>>>> "C:\Document and Settings"  do you think this will matters ????
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> and non working machines (sge_execd not running) Windows profiles
> >>>>>>>>>>>>>> pointing to "D:\Users"
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> this is the only difference i found between working and non working machines...
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> no error found while i m installing machine as execution host, i
> >>>>>>>>>>>>>> carried out the installation process same as the working machines....
> >>>>>>>>>>>>> This might matter for job execution, but it doesn't matter for the Execd
> >>>>>>>>>>>>> startup.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> I found this:
> >>>>>>>>>>>>> The "TERMINATE dispatcher because j == 1" line gets printed when the
> >>>>>>>>>>>>> Execd either receives a SIGTERM or a SIGINT signal or it receives a
> >>>>>>>>>>>>> shutdown request from the QMaster.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> As I can't see any request from the QMaster in the trace file sniplet
> >>>>>>>>>>>>> you sent me, I assume the Execd received a SIGTERM or a SIGINT signal.
> >>>>>>>>>>>>> I can't tell you where this signal came from.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Regards,
> >>>>>>>>>>>>> Harald
> >>>>
> >>>> --
> >>>> Sun Microsystems GmbH         Harald Pollinger
> >>>> Dr.-Leo-Ritter-Str. 7         N1 Grid Engine Engineering
> >>>> D-93049 Regensburg            Phone: +49 (0)941 3075-209  (x60209)
> >>>> Germany                       Fax: +49 (0)941 3075-222  (x60222)
> >>>> http://www.sun.com/gridware
> >>>> mailto:harald.pollinger at sun.com
> >>>> Sitz der Gesellschaft: Sun Microsystems GmbH, Sonnenallee 1,
> >>>> D-85551 Kirchheim-Heimstetten
> >>>> Amtsgericht Muenchen: HRB 161028
> >>>> Geschaeftsfuehrer: Wolfgang Engels, Dr. Roland Boemer
> >>>> Vorsitzender des Aufsichtsrates: Martin Haering
> >>>>
> >>>> ---------------------------------------------------------------------
> >>>> To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
> >>>> For additional commands, e-mail: users-help at gridengine.sunsource.net
> >>>>
> >>>>
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
> > For additional commands, e-mail: users-help at gridengine.sunsource.net
> >
>
>
> --
>
> Sun Microsystems GmbH         Harald Pollinger
> Dr.-Leo-Ritter-Str. 7         N1 Grid Engine Engineering
> D-93049 Regensburg            Phone: +49 (0)941 3075-209  (x60209)
> Germany                       Fax: +49 (0)941 3075-222  (x60222)
> http://www.sun.com/gridware
> mailto:harald.pollinger at sun.com
> Sitz der Gesellschaft: Sun Microsystems GmbH, Sonnenallee 1,
> D-85551 Kirchheim-Heimstetten
> Amtsgericht Muenchen: HRB 161028
> Geschaeftsfuehrer: Wolfgang Engels, Dr. Roland Boemer
> Vorsitzender des Aufsichtsrates: Martin Haering
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
> For additional commands, e-mail: users-help at gridengine.sunsource.net
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list