[GE users] Setting Up A Load Sensor in Grid Engine

Sandeep, Patel(IE10) Sandeep.Patel2 at Honeywell.com
Mon Apr 14 14:29:52 BST 2008


Hi
  I have changed the mode to 755
#/opt/n1ge/util/resources/loadsensor/tmpspace.sh
 It is giving
            Gridmaster: tmpfree :30%k
            Gridmaster:tmpused :10453144K
            Gridmaster:tmpuse  :249804300K
End


But still   qhsot -F tmpfree,tmpused tmptotal is showing only 

HOSTNAME                ARCH         NCPU  LOAD  MEMTOT  MEMUSE  SWAPTO
SWAPUS
------------------------------------------------------------------------
-------
global                  -               -     -       -       -       -
-
gridexecutor            win32-x86       2  0.00    3.0G  419.3M    8.8G
260.7M
gridexecutor1           win32-x86       2  0.00    3.0G  566.4M    8.8G
320.5M
gridexecutor2           win32-x86       1  0.06  502.1M  333.0M    4.0G
531.7M


it is not showing tmpfree,tmptot,tmpused values.what is the problem?


Regards and thanks
Sandeep


           

-----Original Message-----
From: Olesen, Mark [mailto:Mark.Olesen at emcontechnologies.com] 
Sent: Monday, April 14, 2008 6:34 PM
To: users at gridengine.sunsource.net
Subject: RE: [GE users] Setting Up A Load Sensor in Grid Engine

> #./opt/n1ge/util/resources/loadsensor/tmpspace.sh
> 
> It is giving permission denied.

1. What about without the leading dot?
   /opt/n1ge/...  instead of ./opt/n1ge/...

2. Check that you have read/execute permissions
   eg, chmod 755


/mark
This e-mail message and any attachments may contain 
legally privileged, confidential or proprietary Information, 
or information otherwise protected by law of EMCON 
Technologies, its affiliates, or third parties. This notice 
serves as marking of its "Confidential" status as defined 
in any confidentiality agreements concerning the sender 
and recipient. If you are not the intended recipient(s), 
or the employee or agent responsible for delivery of this 
message to the intended recipient(s), you are hereby 
notified that any dissemination, distribution or copying 
of this e-mail message is strictly prohibited. 
If you have received this message in error, please 
immediately notify the sender and delete this e-mail 
message from your computer.



---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net

---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list