[GE users] qstat produces no load data with -xml option

Silvan Kaiser silvan.kaiser at dai-labor.de
Mon Apr 14 15:51:44 BST 2008


    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some special characters may be displayed incorrectly. ]

Hello!
I'm trying to get some qstat info from our SGE test installation.  
Mysteriously qstat produces load information only with the default  
output on the command line but not with the -xml option:

[kaisers at grid07 ~]$ qstat -f
queuename                      qtype used/tot. load_avg arch           
states
----------------------------------------------------------------------------
all.q at grid01.aot.tu-berlin.de  BIP   0/2       0.00     lx24-amd64
----------------------------------------------------------------------------
all.q at grid02.aot.tu-berlin.de  BIP   0/2       0.00     lx24-amd64
----------------------------------------------------------------------------
all.q at grid05.aot.tu-berlin.de  BIP   0/2       0.20     sol-sparc64
----------------------------------------------------------------------------
all.q at grid06.aot.tu-berlin.de  BIP   1/4       0.06     lx24-x86
      88 0.55500 buildscrip kaisers      r     04/14/2008 16:46:56     1
[kaisers at grid07 ~]$ qstat -f -xml
<?xml version='1.0'?>
<job_info  xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <queue_info>
     <Queue-List>
       <name>all.q at grid01.aot.tu-berlin.de</name>
       <qtype>BIP</qtype>
       <slots_used>0</slots_used>
       <slots_total>2</slots_total>
       <arch>lx24-amd64</arch>
     </Queue-List>
     <Queue-List>
       <name>all.q at grid02.aot.tu-berlin.de</name>
       <qtype>BIP</qtype>
       <slots_used>0</slots_used>
       <slots_total>2</slots_total>
       <arch>lx24-amd64</arch>
     </Queue-List>
     <Queue-List>
       <name>all.q at grid05.aot.tu-berlin.de</name>
       <qtype>BIP</qtype>
       <slots_used>0</slots_used>
       <slots_total>2</slots_total>
       <arch>sol-sparc64</arch>
     </Queue-List>
     <Queue-List>
       <name>all.q at grid06.aot.tu-berlin.de</name>
       <qtype>BIP</qtype>
       <slots_used>1</slots_used>
       <slots_total>5</slots_total>
       <arch>lx24-x86</arch>
       <job_list state="running">
         <JB_job_number>88</JB_job_number>
         <JAT_prio>0.55500</JAT_prio>
         <JB_name>buildscript.bash</JB_name>
         <JB_owner>kaisers</JB_owner>
         <state>r</state>
         <JAT_start_time>2008-04-14T16:46:56</JAT_start_time>
         <slots>1</slots>
       </job_list>
     </Queue-List>
   </queue_info>
   <job_info>
   </job_info>
</job_info>
[kaisers at grid07 ~]$


As far as i understand there should be a <load> tag in the xml ouput  
which is missing.
Any ideas why this happens?

Best regards
Silvan


-- 

***************************************
Silvan Kaiser - Researcher
Technische Universität Berlin DAI-Labor - Sekr. TEL 14 Ernst-Reuter- 
Platz 7
10587 Berlin / Germany
Fax:    0049 - 30 - 314 74035
E-mail: Silvan.Kaiser at dai-labor.de.de
http://www.dai-labor.de
***************************************





---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list