[GE users] Setting Up A Load Sensor in Grid Engine

Reuti reuti at staff.uni-marburg.de
Tue Apr 15 11:07:44 BST 2008


Am 15.04.2008 um 09:26 schrieb Sandeep, Patel(IE10):
> Hi
>   This is the output I m getting from master node :-
> begin
> gridmaster:tmpfree:30%k

I'm still confused where the % is coming from - maybe a typo in the  
script getting the 5th argument?

-- Reuti


> gridmaster:tmptot:10454796k
> gridmaster:tmpused:24936648k
> end
>
>
>
> but from Windows execution Node (C shell MSFU), same state.
>
>
> But first of all why this load sensors are not up in execution nodes?
>
> Regards,
> Sandeep
>
> -----Original Message-----
> From: Olesen, Mark [mailto:Mark.Olesen at emcontechnologies.com]
> Sent: Tuesday, April 15, 2008 12:18 PM
> To: users at gridengine.sunsource.net
> Subject: RE: [GE users] Setting Up A Load Sensor in Grid Engine
>
>> df -k
>> ilesystem           1024-blocks      Used Available Capacity Type
>> Mounted on
>> /HarddiskVolume1       15358108  12034884   3323224    78%   ntfs
>> /dev/fs/C
>> /HarddiskVolume2       23695840  11907092  11788748    50%   ntfs
>> /dev/fs/D
>
>
>> From this information, it looks like you need to be extracting  
>> column 2,
> 3 and 4, for the tmp_total, tmp_used and tmp_free, respectively.
> NB: following the principle of least surprise, I've named the  
> complexes
> following the same convention as 'mem', 'swap' or 'virtual' (eg,
> mem_total, mem_used, mem_free).
>
>
>> When I m running /opt/n1ge/util/resources/loadsensors/ 
>> tmpspace.sh   in
>> WINDOWS execution host on C shell of MSFU , no output till now(waited
>> for 20 mins).
>
> Did you press <return>?
>
>>>   I have changed the mode to 755
>>> #/opt/n1ge/util/resources/loadsensor/tmpspace.sh
>>>  It is giving
>>>             Gridmaster: tmpfree :30%k
>>>             Gridmaster:tmpused :10453144K
>>>             Gridmaster:tmpuse  :249804300K
>>> End
>
> I was also curious about this output. It is either a cut-and-paste
> mistake, or have you forgotten to have begin/end markers on the load
> report?
> The spaces between the fields also look a bit strange.
>
> /mark
> This e-mail message and any attachments may contain
> legally privileged, confidential or proprietary Information,
> or information otherwise protected by law of EMCON
> Technologies, its affiliates, or third parties. This notice
> serves as marking of its "Confidential" status as defined
> in any confidentiality agreements concerning the sender
> and recipient. If you are not the intended recipient(s),
> or the employee or agent responsible for delivery of this
> message to the intended recipient(s), you are hereby
> notified that any dissemination, distribution or copying
> of this e-mail message is strictly prohibited.
> If you have received this message in error, please
> immediately notify the sender and delete this e-mail
> message from your computer.
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
> For additional commands, e-mail: users-help at gridengine.sunsource.net
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
> For additional commands, e-mail: users-help at gridengine.sunsource.net
>


---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe at gridengine.sunsource.net
For additional commands, e-mail: users-help at gridengine.sunsource.net




More information about the gridengine-users mailing list