[GE users] Segmentation Fault(coredump) during qmake

reuti reuti at staff.uni-marburg.de
Thu Dec 4 13:12:29 GMT 2008


Am 02.12.2008 um 20:55 schrieb tcheard:

> If thats the case then why am I getting the same error from just a  
> qmake -l h=eng-prf-zone01 build where I haven't requested a  
> parallel environment and requested it to run on a single host?

For a parallelization I also found this hint to replace the loops:

http://www.gnu.org/software/make/manual/make.html#Phony-Targets

-- Reuti


> theard at eng-prf-zone01:~/build/COMMON$ qmake -l h=eng-prf-zone01 build
> CPINC: /home/build/build/theard/COMMON/subsystem
> CPINC: /home/build/build/theard/COMMON/subsystem/Config
> /bin/ksh: 9625 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/Utils
> /bin/ksh: 9644 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/ConfigImpl
> CPINC: /home/build/build/theard/COMMON/subsystem/ConfigImpl/File
> /bin/ksh: 9667 Segmentation Fault(coredump)
> qmake[2]: *** [cpinc] Error 139
> CPINC: /home/build/build/theard/COMMON/subsystem/Mfile
> /bin/ksh: 9685 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/malloc
> /bin/ksh: 9706 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/share
> /bin/ksh: 9733 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/des
> CPINC: /home/build/build/theard/COMMON/subsystem/GNU
> /bin/ksh: 9765 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/cmnFileStore
> /bin/ksh: 9784 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/cmnNOA
> /bin/ksh: 9803 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/escher
> /bin/ksh: 9822 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/ref
> /bin/ksh: 9841 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/fd
> /bin/ksh: 9860 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/dpfd
> /bin/ksh: 9879 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/perfTimer
> /bin/ksh: 9898 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/numberRules
> /bin/ksh: 9919 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/Trace
> /bin/ksh: 9946 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/AdaptiveDistributor
> /bin/ksh: 9972 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/Dummy
> /bin/ksh: 9994 Segmentation Fault(coredump)
> CPINC: /home/build/build/theard/COMMON/subsystem/ociWrappers
> /bin/ksh: 10013 Segmentation Fault(coredump)
>
>
> Tom
>
>
>> Hi,
>>
>> I fear, it will not run much in parallel with qmake. qmake will take
>> care of each rule, but the rules contain loops across sub-
>> directoriers and are calling $(MAKE) again.
>>
>> -- Reuti
>
> ------------------------------------------------------
> http://gridengine.sunsource.net/ds/viewMessage.do? 
> dsForumId=38&dsMessageId=90760
>
> To unsubscribe from this discussion, e-mail: [users- 
> unsubscribe at gridengine.sunsource.net].

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=91119

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list