[GE users] installing sge master

Rafid Al-Khannak alkhannak at googlemail.com
Mon Dec 15 00:05:30 GMT 2008


Dear all,

no not even this one is working " $ ldd `which qmon` "

and i didn't udnerstand what do you mean by " Is the location of the library
in your LD_LIBRARY_PATH? "

regards,
rafid

2008/12/14 reuti <reuti at staff.uni-marburg.de>

> Hi,
>
> Am 14.12.2008 um 18:52 schrieb Rafid Al-Khannak:
>
> > Dear Prentice and all,
> >
> > thanks for the notes, they are very helpful and the command qconf
> > is working now
> >
> > --but about the qmon
> >
> > 1- when i wrote          qmon          the following message appears:
> >
> > qmon: error while loading shared libraries: libXm.so.3: cannot open
> > shared object file: No such file or directory
> >
> > 2- and when i wrote       ldd 'which qmon'       the following
> > message appears:
>
> you will need backquotes here, not normal quotes:
>
> $ ldd `which qmon`
>
> > ldd: ./which qmon: No such file or directory
> >
> > about the first case i downloaded a package contains the libXm.so.3
> > and put it in /usr/X11R6/lib (as i did with the libXm.so.2,
> > libXm.so.2.1)
> >
> > but the same message always appear for the first case:
> >
> > qmon: error while loading shared libraries: libXm.so.3: cannot open
> > shared object file: No such file or directory
>
> Is the location of the library in your LD_LIBRARY_PATH?
>
> -- Reuti
>
> >
> >
> > --also after i followed the notes that you gave me i wrote       ps
> > -ef | grep sge         and the output was:
> >
> > root      3307     1  0 17:33 ?        00:00:00 /home/sun/bin/lx24-
> > x86/sge_qmaster
> > root      4135  4041  0 17:54 pts/2    00:00:00 grep sge
> >
> > does that mean the system is working properly? (because when i
> > checked the "Verifying the Installation" chaper it was almost the
> > same output but not exactly the same)
> >
> > and what about the qmon?
> >
> > regards,
> > rafid
> >
> >
> >
> > 2008/12/12 Prentice Bisbal <prentice at ias.edu>
> > Rafid Al-Khannak wrote:
> > > dear all,
> > >
> > > after installing the master host (i faced some problems throught the
> > > installation like sgemaster didn't start and the CSP cert didn't
> > copy to
> > > the execution hosts but after the installation is finished i started
> > > sgemaster without problems) i should write "qconf -sh" but this
> > message
> > > appears "bash: qconf: command not found"
> >
> > That's because qconf isn't in your PATH yet, because you didn't source
> > settings.sh correctly.
> > >
> > > also i entered this command "SGE_ROOT/default/common#./
> > settings.sh" and
> > > "SGE_ROOT/default/common#./settings.csh" and this message appears
> > "bash:
> > > ./settings.sh: Permission denied"
> > >
> >
> > There are a couple of mistakes in your commands. First you need to
> > define SGE_ROOT properly. Assuming your shell is bash and you
> > installed
> > SGE in /usr/local/sge, your commands should be this:
> >
> > SGE_ROOT=/usr/local/sge
> > source $SGE_ROOT/default/common/settings.sh
> >
> > Notice I use the command "source" and that $SGE_ROOT has a "$" at the
> > front of it, indicating that it SGE_ROOT is a variable.
> >
> > If you do that correctly, the qconf commands should work for you.
> >
> > > and from the verifying the installation i typed this command "ps -
> > ax |
> > > grep sge" and the output was:
> > >
> > > Warning: bad ps syntax, perhaps a bogus '-'? See
> > > http://procps.sf.net/faq.html
> > > 32013 ?        Sl     0:00 /home/sun/bin/lx24-x86/sge_qmaster
> > >   311 pts/0    R+     0:00 grep sge
> >
> > Wrong syntax of the 'ps' command. Try 'ps -ef | grep sge' instead.
> > Please read the man page for 'ps'. It's a very useful tool if you know
> > all the switches to it. You can read the man page with the command
> > 'man ps'
> >
> > >
> > > also with the qmon when i wrote it under sge_root and under the
> > common:
> > > SGE_ROOT/default/common # qmon
> > > SGE_ROOT # qmon
> > >
> > > the output was:
> > > bash: qmon: command not found
> >
> > Again, this is because you didn't source your settings.sh file
> > correctly. If you follow the steps above, 'qmon' should work.
> >
> >
> > --
> > Prentice
> >
> > ------------------------------------------------------
> > http://gridengine.sunsource.net/ds/viewMessage.do?
> > dsForumId=38&dsMessageId=92445
> >
> > To unsubscribe from this discussion, e-mail: [users-
> > unsubscribe at gridengine.sunsource.net].
> >
>
> ------------------------------------------------------
>
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=92587
>
> To unsubscribe from this discussion, e-mail: [
> users-unsubscribe at gridengine.sunsource.net].
>

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=92603

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list