[GE users] sge master

Rafid Al-Khannak alkhannak at googlemail.com
Wed Nov 12 16:29:43 GMT 2008


Dear Michael and All,

I tried to stop it as you said but the following messages appeared with
saying that it can not be shut down:

FH-Soest at FH-Master:~/sun/default/common> ./sgemaster stop
   Shutting down Grid Engine scheduler
./sgemaster: line 90: kill: (3136) - Operation not permitted
./sgemaster: line 90: kill: (3136) - Operation not permitted
./sgemaster: line 90: kill: (3136) - Operation not permitted
./sgemaster: line 90: kill: (3136) - Operation not permitted
./sgemaster: line 90: kill: (3136) - Operation not permitted
./sgemaster: line 90: kill: (3136) - Operation not permitted
./sgemaster: line 98: kill: (3136) - Operation not permitted
   Shutting down Grid Engine qmaster
./sgemaster: line 90: kill: (3038) - Operation not permitted
./sgemaster: line 90: kill: (3038) - Operation not permitted
./sgemaster: line 90: kill: (3038) - Operation not permitted
./sgemaster: line 90: kill: (3038) - Operation not permitted
./sgemaster: line 90: kill: (3038) - Operation not permitted
./sgemaster: line 90: kill: (3038) - Operation not permitted
./sgemaster: line 98: kill: (3038) - Operation not permitted
Can't shut down qmaster!


but it didn't say why.

regards,
rafid



2008/11/12 mpospisil <michael.pospisil at sun.com>

> Hello Rafid,
> It seems as though the qmaster is already running. Try to stop it first
> with ./sgemaster stop   and then you can run the start command as you
> previously tried.
>
> Michael
>
>
> Rafid Al-Khannak wrote:
>
> > Dear Daniel and All,
> >
> > Thank you for the information (about act_qmaster), actually the master
> > is the same machine as before but it was case sensitive in Linux
> > (capital & small letters).
> >
> > Anyway i rewrite the command and i have another problem right now :
> >
> > FH-Soest at FH-Master:~/sun/default/common> ./sgemaster start
> >
> > starting sge_qmaster
> >    starting sge_schedd
> > error: commlib error: endpoint is not unique error (endpoint
> > "FH-Master.grid-soest.de/schedd/1
> > <http://FH-Master.grid-soest.de/schedd/1>" is already connected)
> > error: getting configuration: unable to contact qmaster using port
> > 6444 on host "FH-Master.grid-soest.de <http://FH-Master.grid-soest.de>"
> > error: can't get configuration from qmaster -- backgrounding
> >
> > any help?
> >
> > regards,
> > rafid
> >
> >
> >
> > 2008/11/12 templedf <dan.templeton at sun.com <mailto:dan.templeton at sun.com
> >>
> >
> >     If you really intend to be starting the master on a machine other
> than
> >     the one where it was last started (and might still be running),
> >     you can
> >     edit to $SGE_ROOT/$SGE_CELL/common/act_qmaster file to contain
> >     only the
> >     name of the machine where you're trying to start the master.
> >
> >     Daniel
> >
> >     Rafid Al-Khannak wrote:
> >     > hi all,
> >     >
> >     > when i write the command:       ./sgemaster
> >     > start                         the following message appears:
> >     >
> >     > sge_qmaster didn't start!
> >     > This is not a qmaster host!
> >     > Please, check your act_qmaster file!
> >     >
> >     > any advice?
> >     >
> >     > regards,
> >     > rafid
> >     >
> >
> >     ------------------------------------------------------
> >
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=88568
> >     <
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=88568
> >
> >
> >     To unsubscribe from this discussion, e-mail:
> >     [users-unsubscribe at gridengine.sunsource.net
> >     <mailto:users-unsubscribe at gridengine.sunsource.net>].
> >
> >
>
> ------------------------------------------------------
>
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=88629
>
> To unsubscribe from this discussion, e-mail: [
> users-unsubscribe at gridengine.sunsource.net].
>

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=88630

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list