[GE users] sge master

reuti reuti at staff.uni-marburg.de
Thu Nov 20 13:21:46 GMT 2008


Am 20.11.2008 um 14:16 schrieb Rafid Al-Khannak:

> Hi,
>
> yes I have one network card and i do configure the firewall as you  
> told me but the problem still there with port 6444, what should i  
> check next?

You did it on all machines?

-- Reuti

>
> regards,
> rafid
>
> 2008/11/19 reuti <reuti at staff.uni-marburg.de>
> Hi,
>
> Am 19.11.2008 um 23:39 schrieb Rafid Al-Khannak:
>
> > dear all and Reuti,
> >
> > When I wrote $iptables --list it shows along list but i don't know
> > exactly what do you mean by  "does it show something?"
>
> I meant about port 6444/6445. But now we know at least, that it's
> running.
>
>
> > And I'm using OpenSUSE 10.2
>
> Then you can also use Yast to set it up. Do you have more than one
> network cards installed - one for the external zone and one for the
> internal zone?
>
> For a plain setup with one card: Security and Users => Firewall /
> Allowed Services =>  Advanced... => TCP Ports => 6444 6445 (with a
> blank between the two numbers)
>
> -- Reuti
>
>
> >
> > is this helping you?
> >
> > regards,
> > rafid
> > 2008/11/19 reuti <reuti at staff.uni-marburg.de>
> > Hi,
> >
> > Am 19.11.2008 um 12:56 schrieb Rafid Al-Khannak:
> >
> > > dear all,
> > >
> > > I'm actually new to Linux, so when i checked the firewall
> > > configuration i couldn't find anything related to TCP ports or  
> 6444.
> > > any help?
> >
> > maybe the opposite applies: all is closed by default. When you
> > execute as root:
> >
> > $ iptables --list
> >
> > Does it show something? Which distro are you using?
> >
> > -- Reuti
> >
> >
> > > regards,
> > > rafid
> > >
> > >
> > > 2008/11/13 Christian Reissmann <Christian.Reissmann at sun.com>
> > > Rafid,
> > >
> > > yes, you are right! issue 2728 reports a different error message.
> > > If you
> > > are using the latest maintrunk it is already fixed.
> > >
> > > I think reuti has a good hint, check your firewall settings ...
> > >
> > > Regards,
> > >
> > > Christian
> > >
> > >
> > >
> > >
> > > On 11/13/08 14:23, reuti wrote:
> > > > Hi,
> > > >
> > > > Am 13.11.2008 um 13:58 schrieb Rafid Al-Khannak:
> > > >
> > > >> Dear Christian and All,
> > > >>
> > > >> Actually it's not the same issure; and as you see here:
> > > >>
> > > >> error: getting configuration: unable to contact qmaster using
> > port
> > > >> 6444 on host "FH-Master.grid-soest.de"
> > > >>
> > > >> either i have to figure the problem (which i was trying for the
> > > >> whole week) or to reconfigure this port, could anyone tell  
> me how
> > > >> to reconfigure port 6444?
> > > >> *note: i didn't find anything about port 6444 in installation
> > > guide.
> > > >
> > > > port 6444 and 6445 are the default ports for communication  
> between
> > > > qmaster / execd / interface programs like qstat. You will  
> have to
> > > > open the firewall for these two ports on the machines.
> > > >
> > > > -- Reuti
> > > >
> > > >> regards,
> > > >> rafid
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>
> > > >> 2008/11/12 Christian Reissmann <Christian.Reissmann at sun.com>
> > > >> Hi Rafid,
> > > >>
> > > >> it might be that you hit this issue:
> > > >>
> > > >> http://gridengine.sunsource.net/issues/show_bug.cgi?id=2728
> > > >>
> > > >> Regards,
> > > >>
> > > >> Christian
> > > >>
> > > >>
> > > >>
> > > >> On 11/12/08 16:44, Rafid Al-Khannak wrote:
> > > >>> Dear Daniel and All,
> > > >>>
> > > >>> Thank you for the information (about act_qmaster), actually  
> the
> > > >> master
> > > >>> is the same machine as before but it was case sensitive in  
> Linux
> > > >>> (capital & small letters).
> > > >>>
> > > >>> Anyway i rewrite the command and i have another problem right
> > > now :
> > > >>>
> > > >>> FH-Soest at FH-Master:~/sun/default/common> ./sgemaster start
> > > >>>
> > > >>> starting sge_qmaster
> > > >>>    starting sge_schedd
> > > >>> error: commlib error: endpoint is not unique error (endpoint
> > > >>> "FH-Master.grid-soest.de/schedd/1
> > > >>> <http://FH-Master.grid-soest.de/schedd/1>" is already  
> connected)
> > > >>> error: getting configuration: unable to contact qmaster using
> > > >> port 6444
> > > >>> on host "FH-Master.grid-soest.de <http://FH-Master.grid-
> > soest.de>"
> > > >>> error: can't get configuration from qmaster -- backgrounding
> > > >>>
> > > >>> any help?
> > > >>>
> > > >>> regards,
> > > >>> rafid
> > > >>>
> > > >>>
> > > >>>
> > > >>> 2008/11/12 templedf <dan.templeton at sun.com
> > > >> <mailto:dan.templeton at sun.com>>
> > > >>>     If you really intend to be starting the master on a  
> machine
> > > >> other than
> > > >>>     the one where it was last started (and might still be
> > > >> running), you can
> > > >>>     edit to $SGE_ROOT/$SGE_CELL/common/act_qmaster file to
> > > >> contain only the
> > > >>>     name of the machine where you're trying to start the  
> master.
> > > >>>
> > > >>>     Daniel
> > > >>>
> > > >>>     Rafid Al-Khannak wrote:
> > > >>>      > hi all,
> > > >>>      >
> > > >>>      > when i write the command:       ./sgemaster
> > > >>>      > start                         the following message
> > > appears:
> > > >>>      >
> > > >>>      > sge_qmaster didn't start!
> > > >>>      > This is not a qmaster host!
> > > >>>      > Please, check your act_qmaster file!
> > > >>>      >
> > > >>>      > any advice?
> > > >>>      >
> > > >>>      > regards,
> > > >>>      > rafid
> > > >>>      >
> > > >>>
> > > >>>     ------------------------------------------------------
> > > >>>     http://gridengine.sunsource.net/ds/viewMessage.do?
> > > >> dsForumId=38&dsMessageId=88568
> > > >>>     <http://gridengine.sunsource.net/ds/viewMessage.do?
> > > >> dsForumId=38&dsMessageId=88568>
> > > >>>     To unsubscribe from this discussion, e-mail:
> > > >>>     [users-unsubscribe at gridengine.sunsource.net
> > > >>>     <mailto:users-unsubscribe at gridengine.sunsource.net>].
> > > >>>
> > > >>>
> > > >> --
> > > >> Sun Microsystems GmbH             Christian Reissmann
> > > >> Dr.-Leo-Ritter-Str. 7             Software Engineer
> > > >> D-93049 Regensburg                Phone: +49 (0)941 3075 112
> > > >> Germany                           Fax:   +49 (0)941 3075 222
> > > >> http://www.sun.de                 mailto:
> > > Christian.Reissmann at sun.com
> > > >>                                   http://www.sun.com/gridengine
> > > >> Sitz der Gesellschaft:
> > > >> Sun Microsystems GmbH, Sonnenallee 1, D-85551 Kirchheim-
> > Heimstetten
> > > >> Amtsgericht Muenchen: HRB 161028
> > > >> Geschaeftsfuehrer: Thomas Schroeder, Wolfgang Engels, Dr.  
> Roland
> > > >> Boemer
> > > >> Vorsitzender des Aufsichtsrates: Martin Haering
> > > >>
> > > >> ------------------------------------------------------
> > > >> http://gridengine.sunsource.net/ds/viewMessage.do?
> > > >> dsForumId=38&dsMessageId=88638
> > > >>
> > > >> To unsubscribe from this discussion, e-mail: [users-
> > > >> unsubscribe at gridengine.sunsource.net].
> > > >>
> > > >
> > > > ------------------------------------------------------
> > > > http://gridengine.sunsource.net/ds/viewMessage.do?
> > > dsForumId=38&dsMessageId=88677
> > > >
> > > > To unsubscribe from this discussion, e-mail: [users-
> > > unsubscribe at gridengine.sunsource.net].
> > >
> > > --
> > > Sun Microsystems GmbH             Christian Reissmann
> > > Dr.-Leo-Ritter-Str. 7             Software Engineer
> > > D-93049 Regensburg                Phone: +49 (0)941 3075 112
> > > Germany                           Fax:   +49 (0)941 3075 222
> > > http://www.sun.de                 mailto:
> > Christian.Reissmann at sun.com
> > >                                   http://www.sun.com/gridengine
> > > Sitz der Gesellschaft:
> > > Sun Microsystems GmbH, Sonnenallee 1, D-85551 Kirchheim- 
> Heimstetten
> > > Amtsgericht Muenchen: HRB 161028
> > > Geschaeftsfuehrer: Thomas Schroeder, Wolfgang Engels, Dr. Roland
> > > Boemer
> > > Vorsitzender des Aufsichtsrates: Martin Haering
> > >
> > > ------------------------------------------------------
> > > http://gridengine.sunsource.net/ds/viewMessage.do?
> > > dsForumId=38&dsMessageId=88683
> > >
> > > To unsubscribe from this discussion, e-mail: [users-
> > > unsubscribe at gridengine.sunsource.net].
> > >
> >
> > ------------------------------------------------------
> > http://gridengine.sunsource.net/ds/viewMessage.do?
> > dsForumId=38&dsMessageId=89082
> >
> > To unsubscribe from this discussion, e-mail: [users-
> > unsubscribe at gridengine.sunsource.net].
> >
>
> ------------------------------------------------------
> http://gridengine.sunsource.net/ds/viewMessage.do? 
> dsForumId=38&dsMessageId=89152
>
> To unsubscribe from this discussion, e-mail: [users- 
> unsubscribe at gridengine.sunsource.net].
>

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=89207

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list