[GE users] sge master

gsat77 gsat77 at gmail.com
Fri Nov 21 22:33:10 GMT 2008


Do this master and exec hosts in a VLAN configured network?


Sathya
On Fri, Nov 21, 2008 at 2:28 PM, Rafid Al-Khannak
<alkhannak at googlemail.com>wrote:

> the same error message and i ping between the machines and they are
> connected to the master
>
> - Rafid
>
> 2008/11/21 reuti <reuti at staff.uni-marburg.de>
>
> Am 20.11.2008 um 18:19 schrieb Rafid Al-Khannak:
>>
>> > Actually all the firewalls are off in the master and execution hosts
>>
>> And still the same error message or was it solved in the meantime?
>>
>> A `ping` between the machines is working with the known hostnames of
>> SGE in the cluster?
>>
>> -- Reuti
>>
>>
>> >
>> >
>> > 2008/11/20 reuti <reuti at staff.uni-marburg.de>
>> > Am 20.11.2008 um 14:16 schrieb Rafid Al-Khannak:
>> >
>> > > Hi,
>> > >
>> > > yes I have one network card and i do configure the firewall as you
>> > > told me but the problem still there with port 6444, what should i
>> > > check next?
>> >
>> > You did it on all machines?
>> >
>> > -- Reuti
>> >
>> > >
>> > > regards,
>> > > rafid
>> > >
>> > > 2008/11/19 reuti <reuti at staff.uni-marburg.de>
>> > > Hi,
>> > >
>> > > Am 19.11.2008 um 23:39 schrieb Rafid Al-Khannak:
>> > >
>> > > > dear all and Reuti,
>> > > >
>> > > > When I wrote $iptables --list it shows along list but i don't know
>> > > > exactly what do you mean by  "does it show something?"
>> > >
>> > > I meant about port 6444/6445. But now we know at least, that it's
>> > > running.
>> > >
>> > >
>> > > > And I'm using OpenSUSE 10.2
>> > >
>> > > Then you can also use Yast to set it up. Do you have more than one
>> > > network cards installed - one for the external zone and one for the
>> > > internal zone?
>> > >
>> > > For a plain setup with one card: Security and Users => Firewall /
>> > > Allowed Services =>  Advanced... => TCP Ports => 6444 6445 (with a
>> > > blank between the two numbers)
>> > >
>> > > -- Reuti
>> > >
>> > >
>> > > >
>> > > > is this helping you?
>> > > >
>> > > > regards,
>> > > > rafid
>> > > > 2008/11/19 reuti <reuti at staff.uni-marburg.de>
>> > > > Hi,
>> > > >
>> > > > Am 19.11.2008 um 12:56 schrieb Rafid Al-Khannak:
>> > > >
>> > > > > dear all,
>> > > > >
>> > > > > I'm actually new to Linux, so when i checked the firewall
>> > > > > configuration i couldn't find anything related to TCP ports or
>> > > 6444.
>> > > > > any help?
>> > > >
>> > > > maybe the opposite applies: all is closed by default. When you
>> > > > execute as root:
>> > > >
>> > > > $ iptables --list
>> > > >
>> > > > Does it show something? Which distro are you using?
>> > > >
>> > > > -- Reuti
>> > > >
>> > > >
>> > > > > regards,
>> > > > > rafid
>> > > > >
>> > > > >
>> > > > > 2008/11/13 Christian Reissmann <Christian.Reissmann at sun.com>
>> > > > > Rafid,
>> > > > >
>> > > > > yes, you are right! issue 2728 reports a different error
>> > message.
>> > > > > If you
>> > > > > are using the latest maintrunk it is already fixed.
>> > > > >
>> > > > > I think reuti has a good hint, check your firewall settings ...
>> > > > >
>> > > > > Regards,
>> > > > >
>> > > > > Christian
>> > > > >
>> > > > >
>> > > > >
>> > > > >
>> > > > > On 11/13/08 14:23, reuti wrote:
>> > > > > > Hi,
>> > > > > >
>> > > > > > Am 13.11.2008 um 13:58 schrieb Rafid Al-Khannak:
>> > > > > >
>> > > > > >> Dear Christian and All,
>> > > > > >>
>> > > > > >> Actually it's not the same issure; and as you see here:
>> > > > > >>
>> > > > > >> error: getting configuration: unable to contact qmaster using
>> > > > port
>> > > > > >> 6444 on host "FH-Master.grid-soest.de"
>> > > > > >>
>> > > > > >> either i have to figure the problem (which i was trying
>> > for the
>> > > > > >> whole week) or to reconfigure this port, could anyone tell
>> > > me how
>> > > > > >> to reconfigure port 6444?
>> > > > > >> *note: i didn't find anything about port 6444 in installation
>> > > > > guide.
>> > > > > >
>> > > > > > port 6444 and 6445 are the default ports for communication
>> > > between
>> > > > > > qmaster / execd / interface programs like qstat. You will
>> > > have to
>> > > > > > open the firewall for these two ports on the machines.
>> > > > > >
>> > > > > > -- Reuti
>> > > > > >
>> > > > > >> regards,
>> > > > > >> rafid
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > > >> 2008/11/12 Christian Reissmann <Christian.Reissmann at sun.com>
>> > > > > >> Hi Rafid,
>> > > > > >>
>> > > > > >> it might be that you hit this issue:
>> > > > > >>
>> > > > > >> http://gridengine.sunsource.net/issues/show_bug.cgi?id=2728
>> > > > > >>
>> > > > > >> Regards,
>> > > > > >>
>> > > > > >> Christian
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > > >> On 11/12/08 16:44, Rafid Al-Khannak wrote:
>> > > > > >>> Dear Daniel and All,
>> > > > > >>>
>> > > > > >>> Thank you for the information (about act_qmaster), actually
>> > > the
>> > > > > >> master
>> > > > > >>> is the same machine as before but it was case sensitive in
>> > > Linux
>> > > > > >>> (capital & small letters).
>> > > > > >>>
>> > > > > >>> Anyway i rewrite the command and i have another problem
>> > right
>> > > > > now :
>> > > > > >>>
>> > > > > >>> FH-Soest at FH-Master:~/sun/default/common> ./sgemaster start
>> > > > > >>>
>> > > > > >>> starting sge_qmaster
>> > > > > >>>    starting sge_schedd
>> > > > > >>> error: commlib error: endpoint is not unique error (endpoint
>> > > > > >>> "FH-Master.grid-soest.de/schedd/1
>> > > > > >>> <http://FH-Master.grid-soest.de/schedd/1>" is already
>> > > connected)
>> > > > > >>> error: getting configuration: unable to contact qmaster
>> > using
>> > > > > >> port 6444
>> > > > > >>> on host "FH-Master.grid-soest.de <http://FH-Master.grid-
>> > > > soest.de>"
>> > > > > >>> error: can't get configuration from qmaster -- backgrounding
>> > > > > >>>
>> > > > > >>> any help?
>> > > > > >>>
>> > > > > >>> regards,
>> > > > > >>> rafid
>> > > > > >>>
>> > > > > >>>
>> > > > > >>>
>> > > > > >>> 2008/11/12 templedf <dan.templeton at sun.com
>> > > > > >> <mailto:dan.templeton at sun.com>>
>> > > > > >>>     If you really intend to be starting the master on a
>> > > machine
>> > > > > >> other than
>> > > > > >>>     the one where it was last started (and might still be
>> > > > > >> running), you can
>> > > > > >>>     edit to $SGE_ROOT/$SGE_CELL/common/act_qmaster file to
>> > > > > >> contain only the
>> > > > > >>>     name of the machine where you're trying to start the
>> > > master.
>> > > > > >>>
>> > > > > >>>     Daniel
>> > > > > >>>
>> > > > > >>>     Rafid Al-Khannak wrote:
>> > > > > >>>      > hi all,
>> > > > > >>>      >
>> > > > > >>>      > when i write the command:       ./sgemaster
>> > > > > >>>      > start                         the following message
>> > > > > appears:
>> > > > > >>>      >
>> > > > > >>>      > sge_qmaster didn't start!
>> > > > > >>>      > This is not a qmaster host!
>> > > > > >>>      > Please, check your act_qmaster file!
>> > > > > >>>      >
>> > > > > >>>      > any advice?
>> > > > > >>>      >
>> > > > > >>>      > regards,
>> > > > > >>>      > rafid
>> > > > > >>>      >
>> > > > > >>>
>> > > > > >>>     ------------------------------------------------------
>> > > > > >>>     http://gridengine.sunsource.net/ds/viewMessage.do?
>> > > > > >> dsForumId=38&dsMessageId=88568
>> > > > > >>>     <http://gridengine.sunsource.net/ds/viewMessage.do?
>> > > > > >> dsForumId=38&dsMessageId=88568>
>> > > > > >>>     To unsubscribe from this discussion, e-mail:
>> > > > > >>>     [users-unsubscribe at gridengine.sunsource.net
>> > > > > >>>     <mailto:users-unsubscribe at gridengine.sunsource.net>].
>> > > > > >>>
>> > > > > >>>
>> > > > > >> --
>> > > > > >> Sun Microsystems GmbH             Christian Reissmann
>> > > > > >> Dr.-Leo-Ritter-Str. 7             Software Engineer
>> > > > > >> D-93049 Regensburg                Phone: +49 (0)941 3075 112
>> > > > > >> Germany                           Fax:   +49 (0)941 3075 222
>> > > > > >> http://www.sun.de                 mailto:
>> > > > > Christian.Reissmann at sun.com
>> > > > > >>                                   http://www.sun.com/
>> > gridengine
>> > > > > >> Sitz der Gesellschaft:
>> > > > > >> Sun Microsystems GmbH, Sonnenallee 1, D-85551 Kirchheim-
>> > > > Heimstetten
>> > > > > >> Amtsgericht Muenchen: HRB 161028
>> > > > > >> Geschaeftsfuehrer: Thomas Schroeder, Wolfgang Engels, Dr.
>> > > Roland
>> > > > > >> Boemer
>> > > > > >> Vorsitzender des Aufsichtsrates: Martin Haering
>> > > > > >>
>> > > > > >> ------------------------------------------------------
>> > > > > >> http://gridengine.sunsource.net/ds/viewMessage.do?
>> > > > > >> dsForumId=38&dsMessageId=88638
>> > > > > >>
>> > > > > >> To unsubscribe from this discussion, e-mail: [users-
>> > > > > >> unsubscribe at gridengine.sunsource.net].
>> > > > > >>
>> > > > > >
>> > > > > > ------------------------------------------------------
>> > > > > > http://gridengine.sunsource.net/ds/viewMessage.do?
>> > > > > dsForumId=38&dsMessageId=88677
>> > > > > >
>> > > > > > To unsubscribe from this discussion, e-mail: [users-
>> > > > > unsubscribe at gridengine.sunsource.net].
>> > > > >
>> > > > > --
>> > > > > Sun Microsystems GmbH             Christian Reissmann
>> > > > > Dr.-Leo-Ritter-Str. 7             Software Engineer
>> > > > > D-93049 Regensburg                Phone: +49 (0)941 3075 112
>> > > > > Germany                           Fax:   +49 (0)941 3075 222
>> > > > > http://www.sun.de                 mailto:
>> > > > Christian.Reissmann at sun.com
>> > > > >                                   http://www.sun.com/gridengine
>> > > > > Sitz der Gesellschaft:
>> > > > > Sun Microsystems GmbH, Sonnenallee 1, D-85551 Kirchheim-
>> > > Heimstetten
>> > > > > Amtsgericht Muenchen: HRB 161028
>> > > > > Geschaeftsfuehrer: Thomas Schroeder, Wolfgang Engels, Dr. Roland
>> > > > > Boemer
>> > > > > Vorsitzender des Aufsichtsrates: Martin Haering
>> > > > >
>> > > > > ------------------------------------------------------
>> > > > > http://gridengine.sunsource.net/ds/viewMessage.do?
>> > > > > dsForumId=38&dsMessageId=88683
>> > > > >
>> > > > > To unsubscribe from this discussion, e-mail: [users-
>> > > > > unsubscribe at gridengine.sunsource.net].
>> > > > >
>> > > >
>> > > > ------------------------------------------------------
>> > > > http://gridengine.sunsource.net/ds/viewMessage.do?
>> > > > dsForumId=38&dsMessageId=89082
>> > > >
>> > > > To unsubscribe from this discussion, e-mail: [users-
>> > > > unsubscribe at gridengine.sunsource.net].
>> > > >
>> > >
>> > > ------------------------------------------------------
>> > > http://gridengine.sunsource.net/ds/viewMessage.do?
>> > > dsForumId=38&dsMessageId=89152
>> > >
>> > > To unsubscribe from this discussion, e-mail: [users-
>> > > unsubscribe at gridengine.sunsource.net].
>> > >
>> >
>> > ------------------------------------------------------
>> > http://gridengine.sunsource.net/ds/viewMessage.do?
>> > dsForumId=38&dsMessageId=89207
>> >
>> > To unsubscribe from this discussion, e-mail: [users-
>> > unsubscribe at gridengine.sunsource.net].
>> >
>>
>> ------------------------------------------------------
>>
>> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=89439
>>
>> To unsubscribe from this discussion, e-mail: [
>> users-unsubscribe at gridengine.sunsource.net].
>>
>
>

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=89443

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list