[GE dev] s390x Architecture

uriel01 uriel.carrasquilla at mail.mcgill.ca
Tue Jul 21 14:28:10 BST 2009


> The arch mustn't be "LINUXS390X_26". It must be in the "lx26-s390x"
> format, otherwise there is something wrong.

Thank you for the lx26-s390x hint, it seems to be working:
 
# scripts/distinst -allall -noexit -vdir sge-6beta2 -basedir /opt//n1ge6 lx26-s390x
....
.... <many messages>
....
Installing checkprog
Installing loadcheck
Installing now
Installing checkuser
Installing adminrun
Installing qrsh_starter
Installing testsuidroot
Installing authuser
Installing read_raw
Installing echo_raw
Installing sge_share_mon
Installing infotext
Installing spooldefaults
Installing spooledit
Installing spoolinit
Installing fstype
Installing valid_jvmlib
"openssl" binary not found
Installing ../3rdparty/remote/LINUXS390X_26/rsh
cp: cannot stat `../3rdparty/remote/LINUXS390X_26/rsh': No such file or directory
This command failed: cp ../3rdparty/remote/LINUXS390X_26/rsh /opt//n1ge6/sge-6beta2/utilbin/lx26-s39
0x/rsh
chown: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rsh': No such file or directory
This command failed: chown 0 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rsh
chgrp: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rsh': No such file or directory
This command failed: chgrp 0 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rsh
chmod: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rsh': No such file or directory
This command failed: chmod 4755 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rsh
Installing ../3rdparty/remote/LINUXS390X_26/rshd
cp: cannot stat `../3rdparty/remote/LINUXS390X_26/rshd': No such file or directory
This command failed: cp ../3rdparty/remote/LINUXS390X_26/rshd /opt//n1ge6/sge-6beta2/utilbin/lx26-s3
90x/rshd
chown: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rshd': No such file or directory
This command failed: chown 0 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rshd
chgrp: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rshd': No such file or directory
This command failed: chgrp 0 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rshd
chmod: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rshd': No such file or directory
This command failed: chmod 755 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rshd
Installing ../3rdparty/remote/LINUXS390X_26/rlogin
cp: cannot stat `../3rdparty/remote/LINUXS390X_26/rlogin': No such file or directory
This command failed: cp ../3rdparty/remote/LINUXS390X_26/rlogin /opt//n1ge6/sge-6beta2/utilbin/lx26-
s390x/rlogin
chown: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rlogin': No such file or directory
This command failed: chown 0 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rlogin
chgrp: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rlogin': No such file or directory
This command failed: chgrp 0 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rlogin
chmod: cannot access `/opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rlogin': No such file or directory
This command failed: chmod 4755 /opt//n1ge6/sge-6beta2/utilbin/lx26-s390x/rlogin
Installing job binaries
-----------------------
Installing work
Installing showq
Installing shared libraries
---------------------------
Installing libjuti.so
"libdb-4.4.so" not found. Assuming binaries are statically linked.
Installing libdrmaa.so.1.0
==============================================================================

________________________________________
From: Harald.Pollinger at sun.com [Harald.Pollinger at sun.com] On Behalf Of pollinger [harald.pollinger at sun.com]
Sent: Tuesday, July 21, 2009 4:36 AM
To: dev at gridengine.sunsource.net
Subject: Re: [GE dev] s390x Architecture

rayson wrote:
> I applied your changes to scripts/compilearch and got the same result.
> Then I turned on debugging to find out what was going on:
>
> % sh -xv scripts/compilearch -b LINUXS390X_26
>
> Then I found that it died in the case statement (Map buildarch into uppercase).
>
> So I think the correct parameter to pass to compilearch is:
>
> % scripts/compilearch -b lx26-s390x
> LINUXS390X
>
> ... which means, the correct way to invoke distinst is:
>
> % scripts/distinst -allall -noexit -vdir sge-6beta2 -basedir /tmp LINUXS390X_26

The arch mustn't be "LINUXS390X_26". It must be in the "lx26-s390x"
format, otherwise there is something wrong.

Regards,
Harald

>
> Rayson
>
>
>
> On 7/20/09, uriel01 <uriel.carrasquilla at mail.mcgill.ca> wrote:
>> I haven't been able to make more progress.  When I try the following commands I get the message no mapping for architecture _____ defined yet.  Does anybody know where I should do the mapping?
>>
>>  # ./scripts/compilearch -b "s390x"
>> cannot compile - no mapping for architecture "s390x" defined yet
>>
>>  # ./scripts/compilearch -b LINUXS390X
>> cannot compile - no mapping for architecture "LINUXS390X" defined yet
>>
>>
>>  # diff compilearch compilearch.ORIGINAL
>> 202,206d201
>> <    lx26-s390x)
>> <       BUILDARCH=LINUXS390X
>> <       COMPILE_ARCH=LINUXS390X_26
>> <       TARGET_BITS=TARGET_64BIT
>> <       ;;
>>
>> ------------------------------------------------------
>> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=39&dsMessageId=208324
>>
>> To unsubscribe from this discussion, e-mail: [dev-unsubscribe at gridengine.sunsource.net].
>>
>
> ------------------------------------------------------
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=39&dsMessageId=208335
>
> To unsubscribe from this discussion, e-mail: [dev-unsubscribe at gridengine.sunsource.net].


--
Sun Microsystems GmbH         Harald Pollinger
Dr.-Leo-Ritter-Str. 7         Sun Grid Engine Engineering
D-93049 Regensburg            Phone: +49 (0)941 3075-209  (x60209)
Germany                       Fax: +49 (0)941 3075-222  (x60222)
http://www.sun.com/gridware
mailto:harald.pollinger at sun.com
Sitz der Gesellschaft:
Sun Microsystems GmbH, Sonnenallee 1, D-85551 Kirchheim-Heimstetten
Amtsgericht Muenchen: HRB 161028
Geschaeftsfuehrer: Thomas Schroeder, Wolfgang Engels, Wolf Frenkel
Vorsitzender des Aufsichtsrates: Martin Haering

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=39&dsMessageId=208554

To unsubscribe from this discussion, e-mail: [dev-unsubscribe at gridengine.sunsource.net].

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=39&dsMessageId=208610

To unsubscribe from this discussion, e-mail: [dev-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list