[GE users] Cannot change number of slots

rmc7777 richard.casey at colostate.edu
Wed May 20 00:51:45 BST 2009


Thanks Dan, that worked perfectly.

> Long story. Here's a summary:
> 
> http://blogs.sun.com/roller/page/templedf?entry=understanding_purge
> 
> Basically, the easiest way to fix your problem is to use qconf -mq 
> queuename and then change the slots attribute from 
> "1,[host=1],[host=1]..." to "2".
> 
> Daniel
> 
> rmc7777 wrote:
> > Hi,
> >
> > I'm trying to change the number of slots from 1 to 2 on each of the execution hosts in our queue complex (there are 30 hosts in the queue complex).  Entering
> >
> > qconf -mattr exechost complex_values slots=2 hostname
> >
> > on all hosts seems to run without errors, but the command
> >
> > qconf -sq queuename
> >
> > still shows the number of slots as 1 on all hosts.  Are we using the right commands for this?
> >
> >
> > --------------------------------------------
> > Richard Casey, PhD
> > RMRCE/CSUCB/CEM
> > Campus Delivery 1690
> > Colorado State University
> > Ft. Collins, CO   80523
> > Ph:  970-491-8568
> > Cell: 970-980-5975
> > Email: richard.casey at colostate.edu
> >
> > ------------------------------------------------------
> > http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=197491
> >
> > To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].
> >

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=197540

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list