[GE users] Initital_state doesn't work well.

reuti reuti at staff.uni-marburg.de
Fri Nov 6 10:05:48 GMT 2009


Am 06.11.2009 um 03:18 schrieb nobucika:

>> What is the setting of:
>>
>> $ qconf -sconf
>> ...
>> loglevel log_info
>
> The setting of loglevel is same(log_info).
>
>> Then there might be an entry in:
>>
>> $SGE_ROOT/default/spool/qmaster/messages
>>
>> of the cause for it.
>
> I check messages that were recorded during I set initial_state.
> But I can't find anything abuot disabled queue.
>
> #
> # a part of message file.(cat messages | grep exec_host)
> #
> 11/02/2009 01:01:55|qmaster|qmaster_host|I|execd on exec_host  
> registered
> 11/02/2009 10:10:54|qmaster|qmaster_host|I|job 2037.1 finished on host
> exec_host
> 11/02/2009 12:49:45|qmaster|qmaster_host|I|execd on exec_host  
> registered
> 11/02/2009 12:59:05|qmaster|qmaster_host|I|execd on exec_host  
> registered
> 11/02/2009 14:51:47|qmaster|qmaster_host|I|job 3305.1 finished on host
> exec_host
> 11/02/2009 14:57:49|qmaster|qmaster_host|I|execd on exec_host  
> registered
> 11/02/2009 15:03:08|qmaster|qmaster_host|I|execd on exec_host  
> registered
> 11/02/2009 15:10:45|qmaster|qmaster_host|I|sgeadmin at qmaster_host  
> changed
> state of "queue.q at exec_host" (enabled)
> 11/02/2009 15:33:58|qmaster|qmaster_host|I|execd on exec_host  
> registered
> 11/02/2009 15:44:39|qmaster|qmaster_host|I|execd on exec_host  
> registered

You use fix TCP/IP addresses for all machines? No network problems?  
No other machines with the same address?

-- Reuti


> this issue occured 3 exec_hosts in five hour.(during I set  
> initital_state)
> So I think this issue is reproducible.
>
> What should I do something else?
>
> Nobuchika Tanaka
>
> ------------------------------------------------------
> http://gridengine.sunsource.net/ds/viewMessage.do? 
> dsForumId=38&dsMessageId=225281
>
> To unsubscribe from this discussion, e-mail: [users- 
> unsubscribe at gridengine.sunsource.net].

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=225328

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list