[GE users] Cannot add Execution host! "Obviously there was no qmaster installation yet!"

petrik lubomir.petrik at sun.com
Wed Nov 18 09:48:30 GMT 2009


Well,
the thing is that it should work fine even without that! Can you send me 
the output of the below commands.

Thanks,
   Lubos.

umanga wrote:
> Hi Lubos,
>
> I inserted a new line to "/util/install_modules/inst_execd.sh" as
>
> COMMONDIR=$SGE_ROOT/$COMMONDIR
>
> Now it works fine.
>
> Thanks
> petrik wrote:
>> Ok,
>> what does following return on that host?
>>
>> cd $SGE_ROOT
>> test -f default/common/act_qmaster
>> echo $?
>> ls default/common/act_qmaster
>>
>> Lubos.
>>
>> umanga wrote:
>>   
>>> Hi Lubos,
>>>
>>> Thanks for the tip,
>>> yes cell name is 'default' and I have set SGE_ROOT properly.
>>>
>>> During installation i noticed that COMMONDIR variable missing the 
>>> SGE_ROOT part,
>>> is it correct ? Is it suppose to be a relative directory or absolute 
>>> one like
>>> COMMONDIR=/SGE6/sge6.2/default/common ?
>>>
>>> Here is the output :
>>>
>>> +COMMONDIR=default/common
>>> + LCONFDIR=default/common/local_conf
>>> + CASHAREDDIR=default/common/sgeCA
>>> + '[' '!' -f default/common/act_qmaster -o '!' -f 
>>> default/common/bootstrap ']'
>>> + ./utilbin/lx24-x86/infotext '\nObviously there was no qmaster 
>>> installation yet!\nCall >install_qmaster<\n' 'on the machine which 
>>> shall run the Grid Engi
>>>
>>>
>>> petrik wrote:
>>>     
>>>> i,
>>>> are you sure you entered the correct SGE_CELL? You could always run the 
>>>> script with debug to see what act_qmaster and what bootstrap file the 
>>>> installer really tries to access (e.g.: bash -vx ./inst_sge -x). If you 
>>>> cannot figure out what is wrong post several last lines before you get 
>>>> the error message (since it enters the CheckQmasterInstallation()).
>>>>
>>>> Regards,
>>>>    Lubos.
>>>>
>>>> umanga wrote:
>>>>   
>>>>       
>>>>> Greetings all,
>>>>>
>>>>> I have shared /SGE6/sge6.2 using NFS where every execution host and 
>>>>> qmaster can access the folder.
>>>>> I have two execution hosts running Debian Lenny 64bit and want to add a 
>>>>> new machine with Debian Lenny 32bit.
>>>>>
>>>>> But during "install_execd" it gives the error:
>>>>>
>>>>> "Obviously there was no qmaster installation yet!
>>>>> Call >install_qmaster<
>>>>> on the machine which shall run the Grid Engine qmaster"
>>>>>
>>>>> and stops.
>>>>>
>>>>> This host also can access /SGE6/sge6.2 and the files "act_qmaster" and 
>>>>> "bootstrap " in $SGE_ROOT/$CELL/common folder.
>>>>>
>>>>> Any tips,
>>>>>
>>>>> thanks in advance,
>>>>> umanga
>>>>>
>>>>> ------------------------------------------------------
>>>>> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=227603
>>>>>
>>>>> To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].
>>>>>
>>>>>     
>>>>>         
>>>> ------------------------------------------------------
>>>> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=227611
>>>>
>>>> To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].
>>>>   
>>>>       
>>
>> ------------------------------------------------------
>> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=227620
>>
>> To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].
>>   
>

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=227629

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list