[GE users] Cannot add Execution host! "Obviously there was no qmaster installation yet!"

umanga aumanga at biggjapan.com
Wed Nov 18 10:15:38 GMT 2009


    [ The following text is in the "iso-8859-1" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some special characters may be displayed incorrectly. ]

Hi Lubos,

Thank for the reply,my output was:

cd $SGE_ROOT
+ cd /SGE6/sge6.2/
test -f default/common/act_qmaster
+ test -f default/common/act_qmaster
echo $?
+ echo 0
0
ls default/common/act_qmaster
+ ls default/common/act_qmaster
default/common/act_qmaster


Best Regards

petrik wrote:

Well,
the thing is that it should work fine even without that! Can you send me
the output of the below commands.

Thanks,
   Lubos.

umanga wrote:


Hi Lubos,

I inserted a new line to "/util/install_modules/inst_execd.sh" as

COMMONDIR=$SGE_ROOT/$COMMONDIR

Now it works fine.

Thanks
petrik wrote:


Ok,
what does following return on that host?

cd $SGE_ROOT
test -f default/common/act_qmaster
echo $?
ls default/common/act_qmaster

Lubos.

umanga wrote:



Hi Lubos,

Thanks for the tip,
yes cell name is 'default' and I have set SGE_ROOT properly.

During installation i noticed that COMMONDIR variable missing the
SGE_ROOT part,
is it correct ? Is it suppose to be a relative directory or absolute
one like
COMMONDIR=/SGE6/sge6.2/default/common ?

Here is the output :

+COMMONDIR=default/common
+ LCONFDIR=default/common/local_conf
+ CASHAREDDIR=default/common/sgeCA
+ '[' '!' -f default/common/act_qmaster -o '!' -f
default/common/bootstrap ']'
+ ./utilbin/lx24-x86/infotext '\nObviously there was no qmaster
installation yet!\nCall >install_qmaster<\n' 'on the machine which
shall run the Grid Engi


petrik wrote:



i,
are you sure you entered the correct SGE_CELL? You could always run the
script with debug to see what act_qmaster and what bootstrap file the
installer really tries to access (e.g.: bash -vx ./inst_sge -x). If you
cannot figure out what is wrong post several last lines before you get
the error message (since it enters the CheckQmasterInstallation()).

Regards,
   Lubos.

umanga wrote:




Greetings all,

I have shared /SGE6/sge6.2 using NFS where every execution host and
qmaster can access the folder.
I have two execution hosts running Debian Lenny 64bit and want to add a
new machine with Debian Lenny 32bit.

But during "install_execd" it gives the error:

"Obviously there was no qmaster installation yet!
Call >install_qmaster<
on the machine which shall run the Grid Engine qmaster"

and stops.

This host also can access /SGE6/sge6.2 and the files "act_qmaster" and
"bootstrap " in $SGE_ROOT/$CELL/common folder.

Any tips,

thanks in advance,
umanga

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=227603

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net<mailto:users-unsubscribe at gridengine.sunsource.net>].





------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=227611

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net<mailto:users-unsubscribe at gridengine.sunsource.net>].




------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=227620

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net<mailto:users-unsubscribe at gridengine.sunsource.net>].




------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=227629

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net<mailto:users-unsubscribe at gridengine.sunsource.net>].





More information about the gridengine-users mailing list