[GE users] Arco db running multiple in cells on same master node

templedf daniel.templeton at oracle.com
Thu Apr 1 19:38:24 BST 2010


    [ The following text is in the "utf-8" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some characters may be displayed incorrectly. ]

You should not need to restart either.

Daniel

On 04/01/10 11:33, Goodman, William wrote:
> Yes? you were right, I forgot to do the qconf ?mconf and set the parms,
> would I need to restart
>
> the qmaster daemon or the sgedbwriter? /or both?/
>
> Bill
>
> *From:* Jana.Olivova at Sun.COM [mailto:Jana.Olivova at Sun.COM]
> *Sent:* Friday, March 12, 2010 2:37 AM
> *To:* users at gridengine.sunsource.net
> *Cc:* Dan.Templeton at Sun.COM
> *Subject:* Re: [GE users] Arco db running multiple in cells on same
> master node
>
> Hi,
>
> if you only see one cluster in the drop down menu, it is probably
> because you did not enter during the reporting installation 2 database
> connections but just 1. To reinstall reporting - just run the
> installation again and make sure that you enter connection parameters
> for both databases. If you do not have any data in the database it might
> be because yo did not enable reporting (qconf -mconf)
>
> See the documentation fro installing reporting:
>
> http://wikis.sun.com/display/gridengine62u5/How+to+Install+Reporting
>
> Regards,
>
> Jana
>
> wagoodman wrote:
>
> Thank for the replay?
>
> However when I use the drop down only one cell it there.
>
> So maybe it?s my installation because neither cell(s) are writing to
> arco db, How do
>
> you uninstall ARCo or do you just blow away the directories and run the
> install scripts?
>
> Bill
>
> *From:* Jana.Olivova at Sun.COM <mailto:Jana.Olivova at Sun.COM>
> [mailto:Jana.Olivova at Sun.COM]
> *Sent:* Thursday, March 11, 2010 7:02 AM
> *To:* users at gridengine.sunsource.net <mailto:users at gridengine.sunsource.net>
> *Cc:* Dan.Templeton at Sun.COM <mailto:Dan.Templeton at Sun.COM>
> *Subject:* Re: [GE users] Arco db running multiple in cells on same
> master node
>
> Hi,
>
> You do not need to change the URL, in the upper right corner is a
> dropdown that allows yo to switch between different clusters. The
> reporting console does not care about your SGE_CELL, it cares about
> database connection inforamtion, which you entered during the
> installation of reporting module. So, if yo configured on MySQl multiple
> db's (one per each cluster), then yo had tro enter those connection
> parameters during isntallation.
>
> Jana
>
> wagoodman wrote:
>
> No... As per:"Prerequisite for performing cross-cluster queries is that
>
> you have configured
>
> your database with multiple schemas (not necessary for MySQL)"
>
>
>
> So I am using MySQL, I just created different databases and allowed
>
> arco_read and arco_write
>
> privledges to all databases. (example databases: arcodevel, arcotest and
>
> Arco)
>
>
>
> Bill
>
>
>
> -----Original Message-----
>
> From:Dan.Templeton at Sun.COM  <mailto:Dan.Templeton at Sun.COM>  [mailto:Dan.Templeton at Sun.COM]
>
> Sent: Friday, March 05, 2010 2:40 PM
>
> To: users
>
> Cc: Goodman, William
>
> Subject: Re: [GE users] ARCo db running multiple in cells on same master
>
> node
>
>
>
> When you created the databases for the different cells, did you set up
>
> different schemas in the same DB server?    If so, you can just run
>
> cross-cluster queries as described here:
>
>
>
> http://wikis.sun.com/display/gridengine62u5/Creating+Cross-Cluster+Queri
>
> es
>
>
>
> Daniel
>
>
>
> On 03/05/10 11:32, wagoodman wrote:
>
>
>
>     Hello,
>
>
>
>     I'm new to sge and I have installed the ARCo accounting and reporting
>
>
>
> software and configured it in my devl-cell and test-cell, now I would
>
> like to put it in my production cell, all the cells are on the same
>
> master. The issue is how could I view different cell through the web
>
> browser GUI, how can I change thehttps://<hostname>:<port#>    to view
>
>
>
>     each cell? or is this possible?
>
>
>
>     ------------------------------------------------------
>
>
>
>
>
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessage  <http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessage>
>
> Id=247226
>
>
>
>     To unsubscribe from this discussion, e-mail:
>
>
>
> [users-unsubscribe at gridengine.sunsource.net  <mailto:users-unsubscribe at gridengine.sunsource.net>].
>
>
>
>
>
> ------------------------------------------------------
>
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=247232  <http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=247232>
>
>
>
> To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net  <mailto:users-unsubscribe at gridengine.sunsource.net>].
>
>
>

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=252062

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list