[GE issues] [Issue 3262] New - -t not available for qalter

[reuti]

    [ The following text is in the "utf-8" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some characters may be displayed incorrectly. ]

http://gridengine.sunsource.net/issues/show_bug.cgi?id=3262
                 Issue #|3262
                 Summary|-t not available for qalter
               Component|gridengine
                 Version|6.2u5
                Platform|All
                     URL|
              OS/Version|All
                  Status|NEW
       Status whiteboard|
                Keywords|
              Resolution|
              Issue type|DEFECT
                Priority|P3
            Subcomponent|man
             Assigned to|andreas
             Reported by|reuti






------- Additional comments from reuti at sunsource.net Thu Apr 15 04:20:28 -0700 2010 -------
The man page states that -t is available for qalter. But the range can't be changed at all, so this statement should be removed from the man
page.

The -t can be used as argument for the job range though, as it's outlined in `man sge_types` and mentioned by the original poster.

   wc_job_range
       The wildcard job range specification allows to reference specific array tasks for one or multiple jobs. The job is refer?
       enced via wc_job and in addition gets a range specifier for the array tasks.

       wc_job_range := wc_job [ -t range]

This discussion was on the mailing list shortly.

http://gridengine.sunsource.net/ds/viewMessage.do?dsMessageId=249866&dsForumId=38

A true -t to change the jobrange isn't available for qalter (or the doc is right and the parser fails in case of qalter).

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=36&dsMessageId=253510

To unsubscribe from this discussion, e-mail: [issues-unsubscribe at gridengine.sunsource.net].