[GE users] qlicserver dies randomly

sli1que sli1que at yahoo.com
Mon Apr 26 15:28:22 BST 2010



From:        olesen <Mark.Olesen at faurecia.com>
To:        users at gridengine.sunsource.net
Date:        04/26/2010 01:07 AM
Subject:        Re: [GE users] qlicserver dies randomly
________________________________



On Sun, 2010-04-25 at 09:25 -0700, sli1que wrote:
> I am running qlicserver as a cron and when I do this, the results that
> are written to the cache are wrong. When I run the script from the
> command line it pulls the correct info.

This sounds like your environment (eg, LM_LICENSE_FILE) is not correctly
set or is inconsistent. The corresponding param can be set within the
qlicserver.config to avoid this sort of problem.


> I can't run it on the command line as it dies with no error randomly.

Dies with no error, or with the sigalarm problem?
http://olesenm.github.com/flex-grid/issues.html


>  Anyone have any suggestions

Try using a load sensor to activate qlicserver.
There are a few notes on this recent thread:
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=253681


/mark



DISCLAIMER:
This electronic transmission (and any attachments thereto) is intended solely for the use of the addressee(s). It may contain confidential or legally privileged information. If you are not the intended recipient of this message, you must delete it immediately and notify the sender. Any unauthorized use or disclosure of this message is strictly prohibited. Faurecia does not guarantee the integrity of this transmission and shall therefore never be liable if the message is altered or falsified nor for any virus, interception or damage to your system.

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=254955

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].

Mark
Thanks for the info. I didn't specify all the stats on how I am running.  I will look at the load sensor thread but I am using a qlicense.conf file that sets the LM_LICENSE_FILE value. When I run qlicserver, it may run anywhere from 3 min to 4-5 hours and run perfectly, then just die.  For now I just threw a daemon script on another box that just ssh to my sge master and checks to see if the process is running. (qlicserver), if not it will execute it. I will look further in the qloadsensor info.

Thanks
Eric



More information about the gridengine-users mailing list