[GE users] Unable install execd
anthony_whelan
anthony.tux at gmail.com
Tue Jan 26 18:12:55 GMT 2010
[ The following text is in the "utf-8" character set. ]
[ Your display is set for the "ISO-8859-10" character set. ]
[ Some characters may be displayed incorrectly. ]
Yes, I've removed sge from /etc/services and it's not showing now.
Hmm.. I'm really stumped here. Any help would be excellent or things to try or even a RTFM (with relevant link to TFM)
Anthony
On Tue, Jan 26, 2010 at 6:11 PM, templedf <dan.templeton at sun.com<mailto:dan.templeton at sun.com>> wrote:
Nope. That's a perfectly normal message. A little confusing, but normal.
Daniel
On 01/26/10 09:15, anthony_whelan wrote:
> Output from install_execd also contains this:
>
> Grid Engine TCP/IP communication service
> ----------------------------------------
>
> The port for sge_execd is curently set BOTH as service and by the
> shell environment
>
> SGE_EXECD_PORT = 6445
> sge_execd service set to port 6445
>
> Currently SGE_EXECD_PORT = 6445 is active!
>
> Hit <RETURN> to continue >>
>
>
> Could this mean that port 6445 already has something attached to it?
>
> I tried running netstat but was unable to get anything from it.
>
> On Tue, Jan 26, 2010 at 4:02 PM, Anthony <anthony.tux at gmail.com<mailto:anthony.tux at gmail.com>
> <mailto:anthony.tux at gmail.com<mailto:anthony.tux at gmail.com>>> wrote:
>
> Yes the 64 bit machine is running a 64 bit OS.
> No useful info from 64bit qconf other than expected output
>
> Anthony
>
>
> On Tue, Jan 26, 2010 at 3:56 PM, reuti <reuti at staff.uni-marburg.de<mailto:reuti at staff.uni-marburg.de>
> <mailto:reuti at staff.uni-marburg.de<mailto:reuti at staff.uni-marburg.de>>> wrote:
>
> Am 26.01.2010 um 15:05 schrieb anthony_whelan:
>
> > Output:
> >
> >
> > Checking hostname resolving
> > ---------------------------
> >
> > Cannot contact qmaster. The command failed:
> >
> > ./bin/lx24-amd64/qconf -sh
> >
> > The error message was:
> >
> > ERROR: failed receiving gdi request response for mid=1 (got
> > syncron message receive timeout error).
> >
> > You can fix the problem now or abort the installation
> procedure.
> > The problem can be:
> >
> > - the qmaster is not running
> > - the qmaster host is down
> > - an active firewall blocks your request
> >
> > Contact qmaster again (y/n) ('n' will abort) [y] >>
> >
> > the funny thing is that
> > $SGE_ROOT/bin/lx24-amd64/qconf -sh fails yet
> > $SGE_ROOT/bin/lx24-x86/qconf -sh works
>
> SGE supports heterogenous clusters by default. So this
> shouldn't be a
> problem, otherwise it's an issue.
>
> Is your 64 bit machine running a 64 bit OS? Is there any useful
> output when calling the 64 bit qconf by hand?
>
> -- Reuti
>
>
> >
> >
> > On Tue, Jan 26, 2010 at 2:02 PM, Anthony
> <anthony.tux at gmail.com<mailto:anthony.tux at gmail.com> <mailto:anthony.tux at gmail.com<mailto:anthony.tux at gmail.com>>>
> > wrote:
> > Yes, $SGE_ROOT/default/common is the same for all nodes.
> >
> >
> > On Tue, Jan 26, 2010 at 1:56 PM, reuti
> <reuti at staff.uni-marburg.de<mailto:reuti at staff.uni-marburg.de> <mailto:reuti at staff.uni-marburg.de<mailto:reuti at staff.uni-marburg.de>>>
> > wrote:
> > Am 26.01.2010 um 14:42 schrieb anthony_whelan:
> >
> > > No $SGE_ROOT is installed on each node seperatly
> >
> > You copied the $SGE_ROOT/default/common to all nodes?
> >
> > http://gridengine.sunsource.net/howto/nfsreduce.html
> >
> > -- Reuti
> >
> > >
> > > On Tue, Jan 26, 2010 at 1:40 PM, reuti
> <reuti at staff.uni-marburg.de<mailto:reuti at staff.uni-marburg.de> <mailto:reuti at staff.uni-marburg.de<mailto:reuti at staff.uni-marburg.de>>>
> > > wrote:
> > > Am 26.01.2010 um 13:03 schrieb anthony_whelan:
> > >
> > > > My apologies, I forgot to include the output of qconf
> -sh on the
> > > > execution host:
> > > >
> > > > ERROR: failed receiving gdi request response for mid=1 (got
> > syncron
> > > > message receive timeout error).
> > > >
> > > >
> > > > On Tue, Jan 26, 2010 at 12:01 PM, Anthony
> <anthony.tux at gmail.com<mailto:anthony.tux at gmail.com> <mailto:anthony.tux at gmail.com<mailto:anthony.tux at gmail.com>>>
> > > > wrote:
> > > > Hi Harald,
> > > >
> > > > I have the same problem as Manjula,
> > > >
> > > > To answer your questions:
> > > >
> > > > qconf -sh on qmaster has the execution host listed
> > > >
> > > > qconf -sh on execution host outputs:
> > > >
> > > > "ignor_fqdn" is set to true for $SGE_ROOT/$SGE_CEL?L/common/
> > > > bootstrap
> > >
> > > The $SGE_ROOT is shared berween all nodes?
> > >
> > > -- Reuti
> > >
> > >
> > > > I too am using a 64 bit execution host connecting to a
> 32 bit
> > > qmaster.
> > > >
> > > > Any advice would be greatly appreciated.
> > > >
> > > > Anthony
> > > >
> > > > Hi Manjula,
> > > >
> > > > please answer these questions:
> > > >
> > > >
> > > > Is the execution host listed in the output of
> > > > # qconf -sh
> > > > ?
> > > >
> > > >
> > > > What is printed if you execute
> > > > # qconf -sh
> > > > on the execution host?
> > > >
> > > >
> > > > Is "ignore_fqdn" enabled?
> > > > This is defined in the $SGE_ROOT/$SGE_CEL?L/common/bootstrap
> > file.
> > > >
> > > > Regards,
> > > > Harald
> > > >
> > > >
> > > >
> > > > On 05/19/09 13:09, manjula14 wrote:
> > > > > Hi,
> > > > >
> > > > > My SGE master host is a fedora 8, 32 bit machine which
> I've
> > > > configured successfully.
> > > > > Now I want to add an execution host which is fedora 8,
> 64 bit
> > > > machine.
> > > > > while installing execd it says exec- host is not an
> admin host,
> > > > but I've added it as an admin host using qconf -ah command.
> > > > >
> > > > > (contents of /etc/hosts and /etc/nsswitch.conf are
> same on both
> > > > master and exec host)
> > > > >
> > > > > Kindly help to resolve this issue.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > --------------------?--------------------?--------------
> > > > > http://gridengine.su?nsource.net/ds/viewM<http://nsource.net/ds/viewM>
> <http://nsource.net/ds/viewM>?essage.do?
> > > > dsForumId=?38?&dsMessageId=197363
> > > > >
> > > > > To unsubscribe from this discussion, e-mail: [users-
> > > > unsubscribe at g?ridengine.sunsource.?net].
> > > >
> > > >
> > > > --
> > > > Sun Microsystems GmbH Harald Pollinger
> > > > Dr.-Leo-Ritter-Str. 7 Sun Grid Engine Engineering
> > > > D-93049 Regensburg Phone: +49 (0)941 3075-209 (x60209)
> > > > Germany Fax: +49 (0)941 3075-222 (x60222)
> > > > http://www.sun.com/gridware
> > > > mailto:harald.pollinger at sun.com<mailto:harald.pollinger at sun.com>
> <mailto:harald.pollinger at sun.com<mailto:harald.pollinger at sun.com>>
> > > > Sitz der Gesellschaft:
> > > > Sun Microsystems GmbH, Sonnenallee 1, D-85551 Kirchheim-
> > Heimstetten
> > > > Amtsgericht Muenchen: HRB 161028
> > > > Geschaeftsfuehrer: Thomas Schroeder, Wolfgang Engels,
> Wolf Frenkel
> > > > Vorsitzender des Aufsichtsrates: Martin Haering
> > > >
> > >
> > > ------------------------------------------------------
> > > http://gridengine.sunsource.net/ds/viewMessage.do?
> > > dsForumId=38&dsMessageId=241099
> > >
> > > To unsubscribe from this discussion, e-mail: [users-
> > > unsubscribe at gridengine.sunsource.net<mailto:unsubscribe at gridengine.sunsource.net>
> <mailto:unsubscribe at gridengine.sunsource.net<mailto:unsubscribe at gridengine.sunsource.net>>].
> > >
> >
> > ------------------------------------------------------
> > http://gridengine.sunsource.net/ds/viewMessage.do?
> > dsForumId=38&dsMessageId=241104
> >
> > To unsubscribe from this discussion, e-mail: [users-
> > unsubscribe at gridengine.sunsource.net<mailto:unsubscribe at gridengine.sunsource.net>
> <mailto:unsubscribe at gridengine.sunsource.net<mailto:unsubscribe at gridengine.sunsource.net>>].
> >
> >
>
> ------------------------------------------------------
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=241125
> <http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=241125>
>
> To unsubscribe from this discussion, e-mail:
> [users-unsubscribe at gridengine.sunsource.net<mailto:users-unsubscribe at gridengine.sunsource.net>
> <mailto:users-unsubscribe at gridengine.sunsource.net<mailto:users-unsubscribe at gridengine.sunsource.net>>].
>
>
>
------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=241140
To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net<mailto:users-unsubscribe at gridengine.sunsource.net>].
More information about the gridengine-users
mailing list