[GE users] qsh

mlmersel Jerry.Mersel at weizmann.ac.il
Mon Mar 15 15:44:26 GMT 2010


    [ The following text is in the "iso-8859-1" character set. ]
    [ Your display is set for the "ISO-8859-10" character set.  ]
    [ Some special characters may be displayed incorrectly. ]


they are all running openssh.

With Blessings
and Best regards,

Jerry
2363

"Rebellion against tyranny is obedience to Gd."

Thomas Jefferson

<quote who="reuti">
> Am 15.03.2010 um 09:27 schrieb mlmersel:
>
>> Their is no mismatch between rsh and ssh that I know of.
>> I checked the environment as well and saw nothing of consequence.
>> At the moment I'm checking on only one node, and not changing the
>> configuration
>> of other nodes.
>
> Are all machines running OpenSSH? Or is the login machine running
> something different. I saw strange things happening when one of the
> machines was e.g. Tru64 IIRC. Their SSH was slightly different.
>
> -- Reuti
>
>
>> Any hints will be appreciated.
>>
>> With Blessings
>> and Best regards,
>>
>> Jerry
>> 2363
>>
>> "Rebellion against tyranny is obedience to Gd."
>>
>> Thomas Jefferson
>>
>> <quote who="reuti">
>> > Am 14.03.2010 um 09:14 schrieb mlmersel:
>> >
>> >> In addition to my other email this may be useful.
>> >> When I execute the command and answers:
>> >>
>> >> master:~->56% qrsh -q all.q at cs-server xterm
>> >> poll: protocol failure in circuit setup
>> >> master:~->57% qrsh -q all.q at cs-server
>> >> SH-1.99-OpenSSH_3.9p1
>> >
>> > Do you have local configurations for some of the machines which
>> would
>> > lead to a mismatch between rsh and ssh?
>> >
>> > $ qconf -sconfl
>> >
>> > If all settings are the same, you could also remove them as they
>> > mainly target heterogenous clusters with different paths on each mof
>> > the machines.
>> >
>> > For forwarding X11 it's also necessary to include and -X -Y after /
>> > usr/bin/ssh (unless it's defined already in /etc/ssh/ssh_config or
>> > each user's local ~/.ssh/config)
>> >
>> > -- Reuti
>> >
>> >
>> >> master:~->58%
>> >>
>> >> With Blessings
>> >> and Best regards,
>> >>
>> >> Jerry
>> >> 2363
>> >>
>> >> "Rebellion against tyranny is obedience to Gd."
>> >>
>> >> Thomas Jefferson
>> >>
>> >>
>> >> Hi:
>> >>
>> >> I followed the How-to but it I'm still having problems my setup is:
>> >>
>> >> qconf -mconf cs-server
>> >>
>> >> execd_spool_dir /var/spool/SGE/default
>> >> mailer /bin/mail
>> >> xterm /usr/bin/X11/xterm
>> >> qlogin_daemon /usr/sbin/sshd -i
>> >> qlogin_command /storage/SSGE/util/qlogin_wrapper
>> >> rsh_daemon /usr/sbin/sshd -i
>> >> rsh_command /usr/bin/ssh
>> >> rlogin_daemon /usr/sbin/sshd -i
>> >> rlogin_command /usr/sbin/ssh
>> >>
>> >> then I get:
>> >>
>> >> qrsh -q cs.q at cs-server xterm
>> >> poll: protocol failure in circuit setup
>> >>
>> >>
>> >> Any ideas?
>> >>
>> >> With Blessings
>> >> and Best regards,
>> >>
>> >> Jerry
>> >> 2363
>> >>
>> >> Keep smiling...
>> >> "Rebellion against tyranny is obedience to Gd."
>> >>
>> >> Thomas Jefferson
>> >>
>> >>
>> >> > Am 11.03.2010 um 21:01 schrieb mlmersel:
>> >> >
>> >> >> Thank you.
>> >> >> In the page that describes how to setup using ssh as the startup
>> >> >> mechanism
>> >> >> there is a wrapper script tha treceives 2 parameters a HOST and
>> >> PORT.
>> >> >> How do I pass those parameters?
>> >> >
>> >> > Jsut follow the Howto. When it's not mentioned, then there is
>> >> nothing
>> >> > to do. When want to know it anyway, it's in `man sge_conf` for
>> these
>> >> > parameters.
>> >> >
>> >> > -- Reuti
>> >> >
>> >> >
>> >> >> Or tell gridengine to do it.
>> >> >>
>> >> >>
>> >> >>
>> >> >> With Blessings
>> >> >> and Best regards,
>> >> >>
>> >> >> Jerry
>> >> >> 2363
>> >> >>
>> >> >> "Rebellion against tyranny is obedience to Gd."
>> >> >>
>> >> >> Thomas Jefferson
>> >> >>
>> >> >>
>> >> >> > Hi,
>> >> >> >
>> >> >> > Am 11.03.2010 um 13:12 schrieb mlmersel:
>> >> >> >
>> >> >> >> I am using gridengine 6.2u4, but qsh does not work.
>> >> >> >>
>> >> >> >> I enter the master like this:
>> >> >> >>
>> >> >> >>
>> >> >> >> ssh -X master
>> >> >> >>
>> >> >> >> Then I do:
>> >> >> >> qsh
>> >> >> >> and get:
>> >> >> >> Your job 388729 ("INTERACTIVE") has been submitted
>> >> >> >> waiting for interactive job to be scheduled ...
>> >> >> >> Your interactive job 388729 has been successfully scheduled.
>> >> >> >
>> >> >> > when it was scheduled successfully, there will be an open
>> >> window on
>> >> >> > the "master" and anyone can use it who is in front of the
>> >> machine -
>> >> >> > unfortunately there is nothing forwarding it to your local
>> >> >> > workstation, unless you use VNC to the master or similar
>> >> things to
>> >> >> > get his screen directly. qsh needs a direct network connection
>> >> >> > between the node and the displaying machine.
>> >> >> >
>> >> >> > `qrsh xterm` should work though when you setup ssh as startup
>> >> >> mechanism:
>> >> >> >
>> >> >> > http://gridengine.sunsource.net/howto/qrsh_qlogin_ssh.html
>> >> >> >
>> >> >> > Backgrounds:
>> >> >> >
>> >> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
>> >> >> > dsMessageId=65347&dsForumId=38
>> >> >> >
>> >> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
>> >> >> > dsForumId=38&dsMessageId=247843
>> >> >> >
>> >> >> > -- Reuti
>> >> >> >
>> >> >> >
>> >> >> >> But nothing happens.
>> >> >> >>
>> >> >> >> Please help me to find a solution.
>> >> >> >>
>> >> >> >>
>> >> >> >> With Blessings
>> >> >> >> and Best regards,
>> >> >> >>
>> >> >> >> Jerry
>> >> >> >> 2363
>> >> >> >>
>> >> >> >> "Rebellion against tyranny is obedience to Gd."
>> >> >> >>
>> >> >> >> Thomas Jefferson
>> >> >> >
>> >> >> > ------------------------------------------------------
>> >> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
>> >> >> dsForumId=38&dsMessageId=248003
>> >> >> >
>> >> >> > To unsubscribe from this discussion, e-mail:
>> >> >> > [users-unsubscribe at gridengine.sunsource.net].
>> >> >> >
>> >> >
>> >> > ------------------------------------------------------
>> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
>> >> dsForumId=38&dsMessageId=248137
>> >> >
>> >> > To unsubscribe from this discussion, e-mail:
>> >> > [users-unsubscribe at gridengine.sunsource.net].
>> >> >
>> >
>> > ------------------------------------------------------
>> > http://gridengine.sunsource.net/ds/viewMessage.do?
>> dsForumId=38&dsMessageId=248552
>> >
>> > To unsubscribe from this discussion, e-mail:
>> > [users-unsubscribe at gridengine.sunsource.net].
>> >
>
> ------------------------------------------------------
> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=248700
>
> To unsubscribe from this discussion, e-mail:
> [users-unsubscribe at gridengine.sunsource.net].
>



More information about the gridengine-users mailing list