[GE users] qsh

reuti reuti at staff.uni-marburg.de
Sat Mar 20 22:15:36 GMT 2010


Hi,

Am 15.03.2010 um 16:44 schrieb mlmersel:

> they are all running openssh.

although you solved the X11 issue, this one remains. I still think  
that it's a mismatch between rsh and ssh. Can you please double check  
what:

$ qconf -sconfl

outputs. Any local configurations?

-- Reuti


> With Blessings
> and Best regards,
>
> Jerry
> 2363
>
> "Rebellion against tyranny is obedience to Gd."
>
> Thomas Jefferson
>
> <quote who="reuti">
> > Am 15.03.2010 um 09:27 schrieb mlmersel:
> >
> >> Their is no mismatch between rsh and ssh that I know of.
> >> I checked the environment as well and saw nothing of consequence.
> >> At the moment I'm checking on only one node, and not changing the
> >> configuration
> >> of other nodes.
> >
> > Are all machines running OpenSSH? Or is the login machine running
> > something different. I saw strange things happening when one of the
> > machines was e.g. Tru64 IIRC. Their SSH was slightly different.
> >
> > -- Reuti
> >
> >
> >> Any hints will be appreciated.
> >>
> >> With Blessings
> >> and Best regards,
> >>
> >> Jerry
> >> 2363
> >>
> >> "Rebellion against tyranny is obedience to Gd."
> >>
> >> Thomas Jefferson
> >>
> >> <quote who="reuti">
> >> > Am 14.03.2010 um 09:14 schrieb mlmersel:
> >> >
> >> >> In addition to my other email this may be useful.
> >> >> When I execute the command and answers:
> >> >>
> >> >> master:~->56% qrsh -q all.q at cs-server xterm
> >> >> poll: protocol failure in circuit setup
> >> >> master:~->57% qrsh -q all.q at cs-server
> >> >> SH-1.99-OpenSSH_3.9p1
> >> >
> >> > Do you have local configurations for some of the machines which
> >> would
> >> > lead to a mismatch between rsh and ssh?
> >> >
> >> > $ qconf -sconfl
> >> >
> >> > If all settings are the same, you could also remove them as they
> >> > mainly target heterogenous clusters with different paths on  
> each mof
> >> > the machines.
> >> >
> >> > For forwarding X11 it's also necessary to include and -X -Y  
> after /
> >> > usr/bin/ssh (unless it's defined already in /etc/ssh/ssh_config  
> or
> >> > each user's local ~/.ssh/config)
> >> >
> >> > -- Reuti
> >> >
> >> >
> >> >> master:~->58%
> >> >>
> >> >> With Blessings
> >> >> and Best regards,
> >> >>
> >> >> Jerry
> >> >> 2363
> >> >>
> >> >> "Rebellion against tyranny is obedience to Gd."
> >> >>
> >> >> Thomas Jefferson
> >> >>
> >> >>
> >> >> Hi:
> >> >>
> >> >> I followed the How-to but it I'm still having problems my  
> setup is:
> >> >>
> >> >> qconf -mconf cs-server
> >> >>
> >> >> execd_spool_dir /var/spool/SGE/default
> >> >> mailer /bin/mail
> >> >> xterm /usr/bin/X11/xterm
> >> >> qlogin_daemon /usr/sbin/sshd -i
> >> >> qlogin_command /storage/SSGE/util/qlogin_wrapper
> >> >> rsh_daemon /usr/sbin/sshd -i
> >> >> rsh_command /usr/bin/ssh
> >> >> rlogin_daemon /usr/sbin/sshd -i
> >> >> rlogin_command /usr/sbin/ssh
> >> >>
> >> >> then I get:
> >> >>
> >> >> qrsh -q cs.q at cs-server xterm
> >> >> poll: protocol failure in circuit setup
> >> >>
> >> >>
> >> >> Any ideas?
> >> >>
> >> >> With Blessings
> >> >> and Best regards,
> >> >>
> >> >> Jerry
> >> >> 2363
> >> >>
> >> >> Keep smiling...
> >> >> "Rebellion against tyranny is obedience to Gd."
> >> >>
> >> >> Thomas Jefferson
> >> >>
> >> >>
> >> >> > Am 11.03.2010 um 21:01 schrieb mlmersel:
> >> >> >
> >> >> >> Thank you.
> >> >> >> In the page that describes how to setup using ssh as the  
> startup
> >> >> >> mechanism
> >> >> >> there is a wrapper script tha treceives 2 parameters a HOST  
> and
> >> >> PORT.
> >> >> >> How do I pass those parameters?
> >> >> >
> >> >> > Jsut follow the Howto. When it's not mentioned, then there is
> >> >> nothing
> >> >> > to do. When want to know it anyway, it's in `man sge_conf` for
> >> these
> >> >> > parameters.
> >> >> >
> >> >> > -- Reuti
> >> >> >
> >> >> >
> >> >> >> Or tell gridengine to do it.
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> With Blessings
> >> >> >> and Best regards,
> >> >> >>
> >> >> >> Jerry
> >> >> >> 2363
> >> >> >>
> >> >> >> "Rebellion against tyranny is obedience to Gd."
> >> >> >>
> >> >> >> Thomas Jefferson
> >> >> >>
> >> >> >>
> >> >> >> > Hi,
> >> >> >> >
> >> >> >> > Am 11.03.2010 um 13:12 schrieb mlmersel:
> >> >> >> >
> >> >> >> >> I am using gridengine 6.2u4, but qsh does not work.
> >> >> >> >>
> >> >> >> >> I enter the master like this:
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> ssh -X master
> >> >> >> >>
> >> >> >> >> Then I do:
> >> >> >> >> qsh
> >> >> >> >> and get:
> >> >> >> >> Your job 388729 ("INTERACTIVE") has been submitted
> >> >> >> >> waiting for interactive job to be scheduled ...
> >> >> >> >> Your interactive job 388729 has been successfully  
> scheduled.
> >> >> >> >
> >> >> >> > when it was scheduled successfully, there will be an open
> >> >> window on
> >> >> >> > the "master" and anyone can use it who is in front of the
> >> >> machine -
> >> >> >> > unfortunately there is nothing forwarding it to your local
> >> >> >> > workstation, unless you use VNC to the master or similar
> >> >> things to
> >> >> >> > get his screen directly. qsh needs a direct network  
> connection
> >> >> >> > between the node and the displaying machine.
> >> >> >> >
> >> >> >> > `qrsh xterm` should work though when you setup ssh as  
> startup
> >> >> >> mechanism:
> >> >> >> >
> >> >> >> > http://gridengine.sunsource.net/howto/qrsh_qlogin_ssh.html
> >> >> >> >
> >> >> >> > Backgrounds:
> >> >> >> >
> >> >> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
> >> >> >> > dsMessageId=65347&dsForumId=38
> >> >> >> >
> >> >> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
> >> >> >> > dsForumId=38&dsMessageId=247843
> >> >> >> >
> >> >> >> > -- Reuti
> >> >> >> >
> >> >> >> >
> >> >> >> >> But nothing happens.
> >> >> >> >>
> >> >> >> >> Please help me to find a solution.
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> With Blessings
> >> >> >> >> and Best regards,
> >> >> >> >>
> >> >> >> >> Jerry
> >> >> >> >> 2363
> >> >> >> >>
> >> >> >> >> "Rebellion against tyranny is obedience to Gd."
> >> >> >> >>
> >> >> >> >> Thomas Jefferson
> >> >> >> >
> >> >> >> > ------------------------------------------------------
> >> >> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
> >> >> >> dsForumId=38&dsMessageId=248003
> >> >> >> >
> >> >> >> > To unsubscribe from this discussion, e-mail:
> >> >> >> > [users-unsubscribe at gridengine.sunsource.net].
> >> >> >> >
> >> >> >
> >> >> > ------------------------------------------------------
> >> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
> >> >> dsForumId=38&dsMessageId=248137
> >> >> >
> >> >> > To unsubscribe from this discussion, e-mail:
> >> >> > [users-unsubscribe at gridengine.sunsource.net].
> >> >> >
> >> >
> >> > ------------------------------------------------------
> >> > http://gridengine.sunsource.net/ds/viewMessage.do?
> >> dsForumId=38&dsMessageId=248552
> >> >
> >> > To unsubscribe from this discussion, e-mail:
> >> > [users-unsubscribe at gridengine.sunsource.net].
> >> >
> >
> > ------------------------------------------------------
> > http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=248700
> >
> > To unsubscribe from this discussion, e-mail:
> > [users-unsubscribe at gridengine.sunsource.net].
> >

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=250054

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list