[GE users] SGE 6.2U3 question

templedf daniel.templeton at oracle.com
Wed Mar 31 19:13:15 BST 2010


Use them with -j, e.g. "qacct -b 03310500 -e 03311200 -j \*" to show all 
jobs between 5:00 this morning and noon.

 > Also, not sure why IO and IOW is always "0"

 > The IO stats are always 0 on OSes that don't report per-process IO info.

Daniel

On 03/31/10 10:53, Tatachar, Gopinath [Tech] wrote:
> I used -b&  -e; it doesn't give me what I want. It summarizes and gives the wallclock time used by all jobs and etc.
>
> qacct -b 1003311205.00 -e 1003311208.00
> Total System Usage
>      WALLCLOCK         UTIME         STIME           CPU             MEMORY                 IO                IOW
> ================================================================================================================
>            105            10             0            12              6.660              0.000              0.000
>
> I need to see what was running in a specific period and looks like I need ARCo installed.
> Also, not sure why IO and IOW is always "0"
>
> Thanks
> -----Original Message-----
> From: Daniel Templeton [mailto:daniel.templeton at oracle.com]
> Sent: Wednesday, March 31, 2010 1:48 PM
> To: users
> Cc: Tatachar, Gopinath [Tech]
> Subject: Re: [GE users] SGE 6.2U3 question
>
> Check the qacct(1) man page.  -b and -e are what you want.  Now that
> will only show you jobs that ended within the specified constraints.  If
> you want to know what was running, you'll need to have ARCo installed,
> or at least have the reporting file turned on.
>
> The IO stats are always 0 on OSes that don't report per-process IO info.
>
> Daniel
>
> On 03/31/10 10:27, gtatachar wrote:
>> I am running 6.2U3 open source version on Linux. I am using NFS FS for spooling. Recently we have seen an exponential increace NFS latency on our netapp filer. I have the following questions:
>>
>> 1. How can I find out the jobs that ran during a specific time interval? (I tried the qacct command; only reports the summary and can not list the jobs in a particular interval - at least that's what I thought)
>>
>> 2. Also, in the accounting field the IO and IOW fields are always "0" ; it some how doesn't make sense.
>>
>> Any help/info is appreciated.
>>
>> Thanks
>> Gopi
>>
>> ------------------------------------------------------
>> http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=251963
>>
>> To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].

------------------------------------------------------
http://gridengine.sunsource.net/ds/viewMessage.do?dsForumId=38&dsMessageId=251970

To unsubscribe from this discussion, e-mail: [users-unsubscribe at gridengine.sunsource.net].



More information about the gridengine-users mailing list