Custom Query (431 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (4 - 6 of 431)

1 2 3 4 5 6 7 8 9 10 11 12
Ticket Resolution Summary Owner Reporter
#1357 fixed RHEL6 support Dave Love <d.love@…> Florian.LaRoche@…
Description

Hello,

I think the following is still a small typo in the current sources to make it compile on RHEL6:

--- sge-20110902/source/aimk +++ sge-20110902/source/aimk @@ -2855,7 +2855,7 @@ if ( "$QMON" == 1 ) then

"LD_WRAPPER=$LD_WRAPPER" \ "CFLAGS=$CFLAGS" "SDIR=$SDIR" "SOURCE=$SOURCE" \ "COMPILE_ARCH=$COMPILE_ARCH" \

  • "XCFLAGS=$XCFLAGS" "XLFLAGS=$XLFLAGS" "KRBLIBS=$KRBLIBS" "$FT_INC" \

+ "XCFLAGS=$XCFLAGS $FT_INC" "XLFLAGS=$XLFLAGS" "KRBLIBS=$KRBLIBS" \

"XLIBS=$XLIBS" "LFLAGS=$LFLAGS $KLFLAGS" "STRIP=$STRIP" "RANLIB=$RANLIB" \ "AR=$AR" "ARFLAGS=$ARFLAGS" "TPLIB=$TPLIB" \ "MEMCFLAG=$MEMCFLAG" \

I've uploaded binaries of the current sources again to http://jur-linux.org/rpms/el-updates/ and will update them from time to time in addition to keeping the 8.0.0a release there as well.

best regards,

Florian La Roche

#1361 fixed mini change to correctly line up the default config file Dave Love <d.love@…> Florian.LaRoche@…
Description

Hello SGE developers,

here a change to make sure the default written config file is aligned properly from the number of spaces in it. So pure cosmetic...

best regards,

Florian La Roche

--- a/source/dist/util/install_modules/inst_qmaster.sh +++ b/source/dist/util/install_modules/inst_qmaster.sh @@ -716,9 +716,9 @@ PrintBootstrap?()

$ECHO "# Version: $SGE_VERSION" $ECHO "#" if [ $ADMINUSER != default ]; then

  • $ECHO "admin_user $ADMINUSER"

+ $ECHO "admin_user $ADMINUSER"

else

  • $ECHO "admin_user none"

+ $ECHO "admin_user none"

fi $ECHO "default_domain $CFG_DEFAULT_DOMAIN" $ECHO "ignore_fqdn $IGNORE_FQDN_DEFAULT"

#1362 fixed inst_template.conf Florian.LaRoche@…
Description

Hello,

it would be convenient to have an inst_template.conf file with good defaults installed. As this would put in very Linx/Red? Hat-centric entries, maybe this should just be added to the default source rpm as a separate patch, then the SGE defaults could stay more neutral.

best regards,

Florian La Roche

diff --git a/source/dist/util/install_modules/inst_template.conf b/source/dist/util/install_modules/inst_template.conf index 5bee087..b6d933f 100644 --- a/source/dist/util/install_modules/inst_template.conf +++ b/source/dist/util/install_modules/inst_template.conf @@ -6,19 +6,19 @@

# SGE_ROOT Path, this is basic information #(mandatory for qmaster and execd installation)

-SGE_ROOT="Please enter path" +SGE_ROOT="/opt/sge"

# SGE_QMASTER_PORT is used by qmaster for communication # Please enter the port in this way: 1300 # not like this: 1300/tcp #(mandatory for qmaster installation)

-SGE_QMASTER_PORT=6444 +SGE_QMASTER_PORT="6444"

# SGE_EXECD_PORT is used by execd for communication # Please enter the port in this way: 1300 # Not like this: 1300/tcp #(mandatory for qmaster installation)

-SGE_EXECD_PORT=6445 +SGE_EXECD_PORT="6445"

# SGE_ENABLE_SMF # if set to false SMF will not control SGE services

@@ -26,7 +26,7 @@ SGE_ENABLE_SMF="false"

# SGE_CLUSTER_NAME # Name of this cluster (used by SMF as an service instance name)

-SGE_CLUSTER_NAME="Please enter cluster name" +SGE_CLUSTER_NAME="p6444"

# SGE_JMX_PORT is used by qmasters JMX MBean server # mandatory if install_qmaster -jmx -auto <cfgfile>

@@ -73,11 +73,11 @@ CELL_NAME="default"

# ADMIN_USER, if you want to use a different admin user than the owner, # of SGE_ROOT, you have to enter the user name, here # Leaving this blank, the owner of the SGE_ROOT dir will be used as admin user

-ADMIN_USER="" +ADMIN_USER="root"

# The dir, where qmaster spools this parts, which are not spooled by DB #(mandatory for qmaster installation)

-QMASTER_SPOOL_DIR="Please, enter spooldir" +QMASTER_SPOOL_DIR="/opt/sge/default/spool/qmaster"

# The dir, where the execd spools (active jobs) # This entry is needed, even if your are going to use

@@ -85,7 +85,7 @@ QMASTER_SPOOL_DIR="Please, enter spooldir"

# be spooled in the database. The execution daemon still needs a spool # directory #(mandatory for qmaster installation)

-EXECD_SPOOL_DIR="Please, enter spooldir" +EXECD_SPOOL_DIR="/opt/sge/default/spool"

# For monitoring and accounting of jobs, every job will get # unique GID. So you have to enter a free GID Range, which

@@ -93,7 +93,7 @@ EXECD_SPOOL_DIR="Please, enter spooldir"

# If you want to run 100 Jobs at the same time on one host you # have to enter a GID-Range like that: 16000-16100 #(mandatory for qmaster installation)

-GID_RANGE="Please, enter GID range" +GID_RANGE="20000-20100"

# If SGE is compiled with -spool-dynamic, you have to enter here, which # spooling method should be used. (classic or berkeleydb)

@@ -124,27 +124,27 @@ PAR_EXECD_INST_COUNT="20"

# If you do not enter any host here, you have to add all of your hosts # by hand, after the installation. The autoinstallation works without # any entry

-ADMIN_HOST_LIST="host1 host2 host3 host4" +ADMIN_HOST_LIST=""

# A List of Host which should become submit hosts # If you do not enter any host here, you have to add all of your hosts # by hand, after the installation. The autoinstallation works without # any entry

-SUBMIT_HOST_LIST="host1 host2 host3 host4" +SUBMIT_HOST_LIST=""

# A List of Host which should become exec hosts # If you do not enter any host here, you have to add all of your hosts # by hand, after the installation. The autoinstallation works without # any entry # (mandatory for execution host installation)

-EXEC_HOST_LIST="host1 host2 host3 host4" +EXEC_HOST_LIST=""

# The dir, where the execd spools (local configuration) # If you want configure your execution daemons to spool in # a local directory, you have to enter this directory here. # If you do not want to configure a local execution host spool directory # please leave this empty

-EXECD_SPOOL_DIR_LOCAL="Please, enter spooldir" +EXECD_SPOOL_DIR_LOCAL=""

# If true, the domainnames will be ignored, during the hostname resolving # if false, the fully qualified domain name will be used for name resolving

@@ -167,11 +167,11 @@ COPY_COMMAND="scp"

DEFAULT_DOMAIN="none"

# If a job stops, fails, finish, you can send a mail to this address

-ADMIN_MAIL="none" +ADMIN_MAIL="root"

# If true, the rc scripts (sgemaster, sgeexecd, sgebdb) will be added, # to start automatically during boottime

-ADD_TO_RC="false" +ADD_TO_RC="true"

#If this is "true" the file permissions of executables will be set to 755 #and of ordenary file to 644.

@@ -181,7 +181,7 @@ SET_FILE_PERMS="true"

# When a exechost should be uninstalled, the running jobs will be rescheduled RESCHEDULE_JOBS="wait"

-# Enter a one of the three distributed scheduler tuning configuration sets +# Enter one of the three distributed scheduler tuning configuration sets

# (1=normal, 2=high, 3=max) SCHEDD_CONF="1"

@@ -191,16 +191,16 @@ SCHEDD_CONF="1"

# (mandatory for shadowhost installation) SHADOW_HOST="hostname"

-# Remove this execution hosts in automatic mode +# Remove these execution hosts in automatic mode

# (mandatory for unistallation of execution hosts)

-EXEC_HOST_LIST_RM="host1 host2 host3 host4" +EXEC_HOST_LIST_RM=""

# This option is used for startup script removing. # If true, all rc startup scripts will be removed during # automatic deinstallation. If false, the scripts won't # be touched. # (mandatory for unistallation of execution/qmaster hosts)

-REMOVE_RC="false" +REMOVE_RC="true"

# This is a Windows specific part of the auto isntallation template # If you going to install windows executions hosts, you have to enable the

1 2 3 4 5 6 7 8 9 10 11 12
Note: See TracQuery for help on using queries.